Description
Flowfriend Pump
The Flowfriend Pump gives you Max Flow with the minimum cost.
The Flowfriend Pump is way ahead of time in the field of energy efficient water pumps.
The Flowfriend motor is a premium-efficiency motor IE4. The Flow friend Pump meets the latest energy requirements from 2015 what will be required in the industry.
The engine is fully developed and manufactured in Germany. The flow is adjustable by speed (800-2550 rpm). For controlling the pump a display on the unit is built, where the power, speed and hours are shown and can be adjusted.
The Flowfriend pump is a highly efficient, new generation permanent magnet motor, its made from the highest quality components available in German.
An ingenious and optimised hydraulics, fully stainless steel casting.
Optimum adaptation to the pond and the season by speed control
Permanent Magnet motor (PMSM)
The main advantage of permanent magnet motors compared to a frequency controlled a-synchronous motors is the remarkably high efficiency at low rpm. However, even in the higher rpm range, they are significantly more economical.
Ingenious hydraulic
The hydraulic’s of the pump includes a pump impeller and the pump head. The hydraulic system provides:
a significant extent the overall efficiency of the pump.
For which application the pump is suitable
The Flow friends pump hydraulics is specially designed for high flow at low pressure. Its optimal application is between 0 and 5 meters head:
More pressure available than a propeller pump, which in some pressure piping is unsuitable.
FlowFriend Pump Performance:
- 0700 rpm: 18m3/hour @ 0 meter @ 40 Watt
- 1100 rpm: 30m3/hour @ 0 meter @ 80 Watt
- 1500 rpm: 41m3/hour @ 0 meter @ 145 Watt
- 1900 rpm: 51m3/hour @ 0 meter @ 195 Watt
- 1200 rpm: 20m3/hour @ 1 meter @ 120 Watt
- 1400 rpm: 29m3/hour @ 1 meter @ 160 watt
- 1800 rpm: 42m3/hour @ 1 meter @ 260 Watt
- 2100 rpm: 50m3/hour @ 1 meter @ 360 Watt
- 1600 rpm: 20m3/hour @ 2 meter @ 230 Watt
- 1800 rpm: 31m3/hour @ 2 meter @ 295 watt
- 2000 rpm: 40m3/hour @ 2 meter @ 370 Watt
- 2300 rpm: 50m3/hour @ 2 meter @ 495 Watt
- 1900 rpm: 21m3/hour @ 3 meter @ 335 Watt
- 2000 rpm: 27m3/hour @ 3 meter @ 380 Watt
- 2200 rpm: 39m3/hour @ 3 meter @ 490 Watt
- 2500 rpm: 52m3/hour @ 3 meter @ 690 Watt
- 2200 rpm: 25m3/hour @ 4 meter @ 490 Watt
- 2300 rpm: 32m3/hour @ 4 meter @ 550 Watt
- 2400 rpm: 39m3/hour @ 4 meter @ 605 Watt
- 2400 rpm: 23m3/hour @ 5 meter @ 610 Watt
- 2500 rpm: 35m3/hour @ 5 meter @ 730 Watt
Much more pressure than comparable pumps with maximum m3. Almost all pumps available with larger capacities (watts), have more than 10 meters head. This is very much at the expense of the available flow (number m3). This pressure is a good pond completely unnecessary.
Suitable for:
- Drum Filters
- Bakki Showers
- SuperBead Filters
- Multichamber Systems
- Endless Belt Filter
- Waterfalls
- Moving Bed Filters
- Tricklefilters
The hydraulics of the Flow friend is fully of cast stainless steel 316. Robust, smooth and a perfect shape for minimal internal losses. Thus, the Flow friend has 3 “(90mm) inlet and outlet. The allowable size of particles is less than 15 mm.
The result
The result of the pump is best displayed in the charts pump. The pump was tested at a test facility that meets the following standards: BS EN ISO 9906.
The test bench and the prototype was shown during the Interkoi April this year in Germany. The flow test bench and production Flowfriends will to be showed during the Koishow in Arcen.
Not only is the flow / pressure characteristic shown, but also a so-called Power Curve. Here you can at any point of the graph also also the exact energy of the pump will consume!
Flow friend Pump is a dry to pump for fresh water. Specially designed for large amounts of water in the head range between 0 and 5 meters.
Reviews
There are no reviews yet