Description
Aquadrift Liner Flange Kit
The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
£20.99 inc. VAT
Aquadrift Liner Flange Kit
The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
Aquadrift Liner Flange Kit
The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Weight | 1 kg |
---|---|
Dimensions | 35 × 35 × 5 cm |
Spindrifter Liner Flange Kits
The Spindrifter liner Flange Kit allows you to use the drain with a liner.
Comes complete with fixings.
4″ Flange
3″ Flange
2″ Flange
Available for the 4″, 3″ and 2″ Spindrifter Drains
4″ SpinDrifter Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
If it’s for a liner installation then a flange kit is required and can be added to your basket separately .
https://youtu.be/-ZGL-HGBnXI
Spindrifter Aerated Bottom Drain
The Spindrifter aerated bottom drain is known worldwide for its quality and design. This Spindrifter aerated bottom drain completely replaces the “Standard Bottom Drain.”
The most noticeable feature of the Spindrifter bottom drain is the extra 1 inch DIA Pressure pipe connection in the sump of the drain. This allows the air supply hose to enter the sump independent of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach.
The membrane and backing plate on the Spindrifter bottom drain fits into a recess in the specially manufactured dome (provided). The recess in the Spindrifter bottom drain prevents the membrane from becoming detached. The complete assembly is secured to the Spindrifter bottom drain by means of a stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a nickel plated connector.
Available Sizes:
Recommended Air Flow:
https://youtu.be/-ZGL-HGBnXI
Spindrifter 1 Inch Direct Air Feed Kit
The Spindrifter Direct Air Feed Kit allows you to hook up your air pump direct to the Diffuser; this means no Airline has to be threaded down the 1″ pressure pipe. This has a number of advantages but the main one is no water can find its way down the 1″ Pressure Pipe, which potentially will hold stagnant water and the dreaded blanketweed.
The Spindrifter bottom drain is known worldwide for its quality and design. The Spindrifter bottom drain completely replaces the “Standard Bottom Drain.”
The most noticeable feature of the Spindrifter bottom drain is the extra connection in the sump of the drain. This is where the machined Direct Air Feed connector glues in, supplying Air to the main diffuser stem. This allows the air supply hose to enter the sump independent of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach.
The second part of the Direct Air Feed glues on the end of the 1″ pressure pipe which typically will be located in the filter house, enabling you to connect to the Air Pump.
This Direct Air Kit also prevents any back pressure, causing premature failure on your Air pumps.
Spindrifter Aerated Drain lid
The Spindrifter Aerated Drain lid replaces the standard dome on your 4″ bottom drain. The unit has a wide diameter rubber insert with thousands of tiny holes to allow the air flow to come out.
The air line supply can either be inserted inside the length of the bottom drain pipe – coming out at a convenient place near to where your Air pump will be situated, or it can, be simply run across the base of the pond to your Air pump.
stem fits 1.5″ pressure
110mm Economy Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3mtr 110mm Economy Bottom Drain Kit
6mtr 110mm Economy Bottom Drain Kit
9mtr 110mm Economy Bottom Drain Kit
Draco Retro Fit Bottom Drain
It is said that you can not beat a bottom drain system. If you have a pond that does not have a bottom drain but wish you had installed one, or do you have a bottom drain and want to install another here is the answer.
Allows you to retrofit a bottom drain into your pond and change the system from pump fed to a true gravity fed filter system if filter is lowed to height of pond.
Comes complete with everything that is required to install
3” internal smooth wall pipe (3m standard additional can be purchased)
14 inch long through wall pipe
Angled inlet bottom drain unit
10ft pipe = 2.5cm head drop @ 2200 UK gallons per hour / 10000 litres per hour
15ft pipe = 2.5cm head drop @ 1900 UK gallons per hour / 8600 litres per hour
*please note 3″ valve not included
Spindrifter Aerated Bottom Drain Twin Inlets
The Spindrifter bottom drain is known worldwide for its quality and design. This unit completely replaces the “Standard Bottom Drain.”
The most noticeable feature is the extra connection in the sump of the drain. This allows the air supply hose to enter the sump independently of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach. The membrane and backing plate fit into a recess in the specially manufactured dome (provided). The recess in the dome prevents the membrane from becoming detached. The complete assembly is secured to the bottom drain by means of stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a nickel-plated connector.
Reviews
There are no reviews yet