Home » Shop » Water Purifiers » Dechlorinator units » Aquaforte Phospat 3
Aquaforte Phospat 1 2
  • Aquaforte Phospat 1 2

Aquaforte Phospat 3

£1,137.99 inc. VAT

Aquaforte Phospat 3

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

– Reduces phosphate in water and supports the biofilter

– Suitable for ponds, natural pools, fountains and circulation wells

– Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate

– Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)

– Defined particle size of the individual layers

– Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)

– Several PHOSPATs can be combined for larger volumes of water

– The Phospat should be protected against contamination with appropriate pre-filtration

– Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 ba

These are 2″ female thread

SKU: MD996 Category:

Description

Aquaforte Phospat 3

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

– Reduces phosphate in water and supports the biofilter

– Suitable for ponds, natural pools, fountains and circulation wells

– Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate

– Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)

– Defined particle size of the individual layers

– Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)

– Several PHOSPATs can be combined for larger volumes of water

– The Phospat should be protected against contamination with appropriate pre-filtration

– Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 ba

These are 2″ female thread

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Additional information

Weight 6 kg
Dimensions 40 × 20 × 20 cm

Related Products

Pro Line Cylinder Purifier Replacement Housing (10″ small)
Pro Line Cylinder Purifier Replacement Housing (10″ small)

Water Purifier Replacement Housing (10″ small)

Water purifiers can play a major role in removing unwanted toxins leaving good water quality in the pond and helping to keep your fish healthy. This is a Replacement Housing only.

not rated £21.99 inc. VAT Add to basket
Oase Inline Dechlorinator
Oase Inline Dechlorinator

Oase Inline Dechlorinator

What is safe for humans can be harmful or potentially fatal for sensitive fish, plants and other pond inhabitants. Therefore, your pond should only be topped up and replenished with pre-filtered tap water that is free of chlorine, chloramine and heavy metals.

The Oase Inline Dechlorinator is ideal for this purpose and uses high performance active carbon to ensure fresh tap water is free from any potentially harmful additives making it completely safe for your fish and plants. Simple to install, the Dechlorinator easily connects to a standard garden hosepipe via high quality metal quick-release couplings meaning you can simply link it up to your outside tap and leave until the pond is full.

The Oase Dechlorinator is compact at around 50cm long so is nice and easy to store. The unit can filter an impressive 200,000 litres of tap water prior to replacement and has a maximum recommended flow rate of 500 litres per hour or around 8 litres per minute for the efficient removal of chlorine, chloramine and heavy metals.

Incidentally the Oase Dechlorinator is also suitable for use with aquariums.

  • High performance active charcoal cartridge
  • Immediately binds chlorine and heavy metals
  • Sufficient for the treatment of 200,000 litres of tap water
  • 500 LPH Recommended maximum flow rate;
  • Ideal for filling or replenishing ponds and aquariums
  • Makes tap water safe for fish, plants, filter bacteria and other pond inhabitants
  • Easy to use thanks to standard hosepipe connections
£109.99 inc. VAT Add to basket
Pro-Line Cylinder Purifiers
Pro-Line Cylinder Purifiers

Pro-Line Cylinder Purifiers

Water purifiers can play a major role in removing unwanted toxins leaving good water quality in the pond and helping to keep your fish healthy.

 

Stage 1 uses a 10″ 5 micron per filter to dirt, iron as well as other particulates.

Stage 2 is the larger granular activated carbon filter,  witch removes chorine and dissolved contaminants.

 

small contains 6kg of activated carbon

medium  contains 12kg of activated carbon

large contains 18kg of activated carbon

£210.99 – £405.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Water Purifier Replacement Carbon
Water Purifier Replacement Carbon

Water Purifier Replacement Carbon

Water purifiers can play a major role in removing unwanted toxins leaving good water quality in the pond and helping to keep your fish healthy. This can be bought in two sizes 1kg and 25kg.

not rated £12.99 – £285.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Water Purifier Replacement Pre Filter Cartridges
Water Purifier Replacement Pre Filter Cartridges

Water Purifier Replacement Pre Filter Cartridges

Spun Polypropylene filter cartridges are commonly used due to their superior capacity and efficiency whilst ensuring low pressure drops. This is achieved by a solvent, resin binder and surfactant free construction using nothing but polypropylene, externally finished with thermal bonding. Our cartridges are characterised by excellent sediment absorption of sand, silt, rust and suspended solids. Water purifiers can play a major role in removing unwanted toxins leaving good water quality in the pond and helping to keep your fish healthy. There are 3 different replacement pre filter cartridges available.

Available Sizes:
  • 10″ x 4.5″ 20 Micron Moulded Particle/Sediment Filter
  • 10″ x 2.5″ 20 Micron Pre Filter Cartridge
  • 10″ x 2.5″ 5 Micron Pre Filter Cartridge
not rated £3.99 – £16.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Evolution Aqua Detox Dechlorinator
Evolution Aqua Detox Dechlorinator

Evolution Aqua Detox Dechlorinator

The Evolution Aqua Detox Dechlorinator is a quick and simple method of filtering out harmful chlorine and other impurities from tap water. It is ideal for first fill, water changes and top-ups, for both ponds and aquariums.

There’s no need to wait for chlorine to gas-off or to use liquid treatments. Simply fill up straight from the hosepipe via the Dechlorinator. This unit simply connects to garden hose or rigid pipe work. Connectors are included.

Hi-grade activated carbon removes chlorine, chloramine, bromine, malachite green, dyes, colours, humic acids, organics, proteins, antibiotics, hormones and ozone.

New and improved for 2017 with high capacity carbon for optimum chlorine removal.

£84.95 – £124.95 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Pro-Line Pod Purifiers
Pro-Line Pod Purifiers

Pro-Line Pod Purifiers

 

These SKS Pod Purifier range of pond water purifiers are the affordable way of removing harmful substances and toxins that are present in most house-holds water when topping up your pond.

This may help to reduce your Koi from picking up diseases.

In General a flow rate of between 1 – 2 gls./min. will effectively process some 8,000 – 10,000 gallons for 10 inch pods and 18,000 to 20,000 for 20 inch pods.

Please note these figures can vary and depend to a certain extent on the quality of the water in your area.

All SKS pods come complete with all cartridges.

not rated £6.99 – £212.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Aquaforte Phospat 1
Aquaforte Phospat 1

Aquaforte Phospat 1

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

  • Reduces phosphate in water and supports the biofilter
  • Suitable for ponds, natural pools, fountains and circulation wells
  • Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate
  • Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)
  • Defined particle size of the individual layers
  • Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)
  • Several PHOSPATs can be combined for larger volumes of water
  • The Phospat should be protected against contamination with appropriate pre-filtration – Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 bar

These are 1″ male thread

not rated £543.99 inc. VAT Read more