Home » Shop » Water Purifiers » Dechlorinator units » Aquaforte Phospat 1
  • Aquaforte Phospat 1

Aquaforte Phospat 1

£543.99 inc. VAT

Aquaforte Phospat 1

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

  • Reduces phosphate in water and supports the biofilter
  • Suitable for ponds, natural pools, fountains and circulation wells
  • Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate
  • Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)
  • Defined particle size of the individual layers
  • Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)
  • Several PHOSPATs can be combined for larger volumes of water
  • The Phospat should be protected against contamination with appropriate pre-filtration – Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 bar

These are 1″ male thread

Out of stock

SKU: MD995 Category:

Description

Aquaforte Phospat 1

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

  • Reduces phosphate in water and supports the biofilter
  • Suitable for ponds, natural pools, fountains and circulation wells
  • Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate
  • Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)
  • Defined particle size of the individual layers
  • Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)
  • Several PHOSPATs can be combined for larger volumes of water
  • The Phospat should be protected against contamination with appropriate pre-filtration – Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 bar

These are 1″ male thread

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Additional information

Weight 5 kg
Dimensions 30 × 10 × 20 cm