NT Labs Pond Multi Test Kit

NT Labs Hardness Test Kit

NT Labs Hardness Test Kit – Comprehensive Monitoring for Your Pond’s Water Quality

Understanding KH (Carbonate Hardness): KH, also known as “total alkalinity” or “carbonate hardness,” measures the buffering capacity of your pond water. This capacity indicates how well the water can resist changes in pH.

What is the Correct KH Level? Maintain a minimum KH level of 4 dKH at all times, with a more desirable range between 6 and 8 dKH. This test kit measures KH in dKH, where one dKH equals 17.8 ppm as CaCO3.

What to Do if the KH Level is Wrong:

• Check the KH level of your tap water. Regular water changes are sufficient if the tap water KH is above 6 dKH.
• If tap water KH is below 6 dKH, use a KH buffer like KH – Buffer Up to maintain a suitable level in your pond.

How to Use the KH Test:

1. Ensure the test tube is clean.
2. Collect a 5 ml water sample into the test tube.
3. Add one drop of the KH reagent, mix, and observe the pale blue colour.
4. Continue adding drops, one by one, mixing between drops until the colour changes from blue to yellow.
5. The number of drops needed for the colour change equals the KH value in dKH.

Understanding GH (General Hardness): GH measures the total minerals dissolved in water, with water hardness ranging from ‘soft’ to ‘hard’ based on mineral content. Hard water can lead to limescale build-up.

What is the Correct GH Level? For pond fish, the ideal GH level is between 8 and 12 dGH. This test kit measures GH in dGH, where one degree equals 17.8 ppm as CaCO3.

What to Do if the GH Level is Wrong:

• Test the GH of your tap water. If too hard, consider using alternative water sources like reverse osmosis water to lower GH.
• In ponds, where rainwater may lower GH over time, use GH & Minerals Up to boost GH to a suitable level.

How to Use the GH Test:

1. Ensure the test tube is clean.
2. Collect a 5 ml water sample into the test tube.
3. Add two drops of GH A reagent, mix, and observe the dark pink colour.
4. Add one drop at a time of GH B reagent, counting the drops between mixing until the solution changes from pink to blue.
5. The number of drops needed for the colour change equals the GH value in dGH.

Maintain the balance of KH and GH in your pond with NT Labs Hardness Test Kit, ensuring optimal water quality and a healthy environment for your fish. Trust NT Labs for precise water testing solutions.

NT Labs Nitrite Test Kit

NT Labs Nitrite Test – Safeguarding Your Aquarium Against Harmful Nitrite Levels

Understanding Nitrite: Nitrite is a by-product of beneficial filtration bacteria breaking down harmful ammonia excreted by fish. Although not as toxic as ammonia, nitrite poses a serious threat to fish health. It is invisible to the naked eye and is broken down into nitrate, which is less harmful to fish.

What is the Correct Nitrite Level? Zero tolerance for nitrite is crucial in aquariums. Maintain a level of zero mg/L (ppm) at all times to ensure the well-being of your fish.

What to Do if the Nitrite Level is Wrong:

• For 0.25 – 0.5 mg/l (ppm) of nitrite, add Filter Bugs.
• If nitrite levels exceed this range, conduct a substantial water change. Change 25% of the water volume for 1 mg/l (ppm) nitrite and 50% for higher levels.
• Zeolite can remove ammonia (and thus nitrite) from the water and can be recharged.
• If nitrite is detected, check other vital water quality parameters, especially pH and ammonia.

How to Use the Nitrite Test:

1. Ensure the test tube is clean.
2. Collect a 5 ml water sample into the test tube.
3. Add 5 drops of the Nitrite reagent.
4. Replace the test tube cap and shake thoroughly.
5. Wait for 2 minutes, then compare the color of the sample to the provided color scale. A colorless sample indicates zero nitrite, while any hint of pink signals the presence of nitrite in the water. Disregard any color forming after the two minutes.

Additional Information:

• The test kit reports concentration in terms of nitrogen (NO2-N) for compatibility with reported safe concentrations for fish and plants.
• If interested in the ionic concentration, multiply the result by 3.29 (NO2-N).

Trust NT Labs Nitrite Test to provide accurate measurements, allowing you to take prompt action against harmful nitrite levels. Keep your fish healthy and thriving by monitoring and managing nitrite effectively. Rely on NT Labs for reliable water testing solutions.