Description
Aquadrift Bottom Drain Air Kit
The Aquadrift Bottom Drain Air Kit Is to connect the 1″ pressure pipe from the bottom drain to 19mm flexi hose that can be put to an air pump.
Aquadrift Bottom Drain Air Kit
£7.99 inc. VAT
Aquadrift Bottom Drain Air Kit
The Aquadrift Bottom Drain Air Kit Is to connect the 1″ pressure pipe from the bottom drain to 19mm flexi hose that can be put to an air pump.
Only logged in customers who have purchased this product may leave a review.
Q & A
There are no questions yet
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
Related Products
Economy Bottom Drains With Ring Aerator
Economy Bottom Drains With Ring Aerator
All Koi ponds should be fitted with bottom drains, and we strongly recommend this.
These Economy Bottom Drains With Ring Aerator are well made and are suited for use with 110mm or 50mm waste pipe. The dome is removable with a large integral surface mounted air ring diffuser around the outer edge
We cannot express the importance of installing a bottom drain when planning and building your pond and these drains provide a cost effective way of doing this.
Available in 50mm and 110mm .
The Bottom Drain comes complete with air tube
*NOTE: It cannot be used with pressure pipe.
Retro Fit Bottom Drain
Retro Fit Bottom Drain
The New Retro Fit Bottom Drain bottom drain, Portable Bottom Dome / Suction Drain
Improves water circulation, helps remove suspended particles and debris from the bottom of your pond reducing maintenance.
It is said that you can not beat a bottom drain system. If you have a pond that does not have a bottom drain but wish you had installed one, or do you have a bottom drain and want to install another here is the answer.
A bottom dome that sits on the floor of your pond which requires no digging or intensive labour. Just simply place the self -weighted bottom dome in your pond and attach a pipe from either an internal pump such as an oase aquamax or promax (these pumps have two inlets) or an external pond pump,and enjoy all the benefits of a bottom drain with minimal expense.
Draco Retro Fit Bottom Drain
Draco Retro Fit Bottom Drain
It is said that you can not beat a bottom drain system. If you have a pond that does not have a bottom drain but wish you had installed one, or do you have a bottom drain and want to install another here is the answer.
Allows you to retrofit a bottom drain into your pond and change the system from pump fed to a true gravity fed filter system if filter is lowed to height of pond.
Comes complete with everything that is required to install
3” internal smooth wall pipe (3m standard additional can be purchased)
14 inch long through wall pipe
Angled inlet bottom drain unit
10ft pipe = 2.5cm head drop @ 2200 UK gallons per hour / 10000 litres per hour
15ft pipe = 2.5cm head drop @ 1900 UK gallons per hour / 8600 litres per hour
*please note 3″ valve not included
Pro-Line 4″ Aerated Bottom Drain Kit
Pro-Line 4″ Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3 mtr Pro-Line Aerated Bottom Drain Kit Includes :
- 1 x 4″ Pro-Line Bottom Drain – AP520
- 1 x 3mtr 4″ pressure pipe – PW7078
- 1 x 3mtr 1″ pressure pipe – PW7601
- 1 x 4″ 90 degree pressure swept bend – PW7645
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
6 mtr Pro-Line Aerated Bottom Drain Kit Includes :
- 1 x 4″ Pro-Line Bottom Drain – AP520
- 2 x 3mtr 4″ pressure pipe – PW7078
- 2 x 3mtr 1″ pressure pipe – PW7601
- 1 x 4″ 90 degree pressure swept bend – PW7645
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
- 1 x 4″ Straight joiner – PW7081 (07190)
- 1 x 1″ Straight joiner – PW7603 (07184)
9 mtr Pro-Line Aerated Bottom Drain Kit Includes :
- 1 x 4″ Pro-Line Bottom Drain – AP520
- 3 x 3mtr 4″ pressure pipe – PW7078
- 3 x 3mtr 1″ pressure pipe – PW7601
- 1 x 4″ 90 degree pressure swept bend – PW7645
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
- 2 x 4″ Straight joiner – PW7081 (07190)
- 2 x 1″ Straight joiner – PW7603 (07184)
Tommy Bottom Drains
Tommy Bottom Drains
These Tommy Bottom Drains are perfect for those using mid water feeds to the filter systems and are worried about pulling fish in to the filter, pumps etc.
The Tommy Drain has its outlet at the Bottom of the Drain instead of the side of the drain like typical bottom drains.
The Tommy Drain has a removable lid with stainless Steel screws and a flange ring for fitting to liner or concrete ponds.
The Tommy Drain can still be used mounted in the pond base if required, such as for a quarantine system or where the outlet is best suited at the bottom of the drain instead of the side.
The Tommy Bottom Drains are suitable for outlets from the side or bottom of your pond or filter.
Available in the following sizes: 1.5″, 2″, 3″ and the most popular 110 mm.
Spindrifter Liner Flange Kits
Spindrifter Liner Flange Kits
The Spindrifter liner Flange Kit allows you to use the drain with a liner.
Comes complete with fixings.
4″ Flange
- 350mm external diameter
- 250mm internal diameter
- 5mm thick
- 50mm flange width
- 12 holes
3″ Flange
- 295mm external diameter
- 200mm internal diameter
- 5mm thick
- 48mm flange width
- 8 holes
2″ Flange
- 238mm external diameter
- 160mm internal diameter
- 5mm thick
- 40mm flange width
- 6 holes
Available for the 4″, 3″ and 2″ Spindrifter Drains
Spindrifter 1 Inch Direct Air Feed Kit
Spindrifter 1 Inch Direct Air Feed Kit
The Spindrifter Direct Air Feed Kit allows you to hook up your air pump direct to the Diffuser; this means no Airline has to be threaded down the 1″ pressure pipe. This has a number of advantages but the main one is no water can find its way down the 1″ Pressure Pipe, which potentially will hold stagnant water and the dreaded blanketweed.
The Spindrifter bottom drain is known worldwide for its quality and design. The Spindrifter bottom drain completely replaces the “Standard Bottom Drain.”
The most noticeable feature of the Spindrifter bottom drain is the extra connection in the sump of the drain. This is where the machined Direct Air Feed connector glues in, supplying Air to the main diffuser stem. This allows the air supply hose to enter the sump independent of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach.
The second part of the Direct Air Feed glues on the end of the 1″ pressure pipe which typically will be located in the filter house, enabling you to connect to the Air Pump.
This Direct Air Kit also prevents any back pressure, causing premature failure on your Air pumps.
Spindrifter Aerated Drain lid
Spindrifter Aerated Drain lid
The Spindrifter Aerated Drain lid replaces the standard dome on your 4″ bottom drain. The unit has a wide diameter rubber insert with thousands of tiny holes to allow the air flow to come out.
The air line supply can either be inserted inside the length of the bottom drain pipe – coming out at a convenient place near to where your Air pump will be situated, or it can, be simply run across the base of the pond to your Air pump.
stem fits 1.5″ pressure
- Ideal for all types of bottom drains if used in conjunction with the correct adaptors.
- EDPM rubber membrane which can be replaced.
- Suitable for up to 80 ltrs of air at 6ft depth.
Reviews
There are no reviews yet