£2.49 – £4.98 inc. VAT
Yamitsu UV Replacement Quartz Sleeve O Rings
Genuine replacement O ring for quartz sleeves that fit all Yamitsu algae master UV units. These are sold as a pair of O Rings. You would need 1 pair of O rings for the 11, 15, 25, 30, 55, and would need 2 for the 110w
Yamitsu UV Replacement Quartz Sleeve O Rings
Genuine replacement O ring for quartz sleeves that fit all Yamitsu algae master UV units. These are sold as a pair of O Rings. You would need 1 pair of O rings for the 11, 15, 25, 30, 55, and would need 2 for the 110w
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 15,25,30 & 55w, 110w |
Yamitsu Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful at they might be, we do also sell the spare Yamitsu Quartz Sleeves in the most standard sizes.
The Yamitsu Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water. Yamitsu Quartz Sleeves are of open-ended construction and are made from pure fused quartz.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made from crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
Yamitsu Quartz Sleeve Benefits:
Yamitsu Quartz Sleeve Dimensions:
Quartz sleeves are available for the Yamitsu Algae Master Pond UV Clarifier 6, 8, 11, 15-, 25-, 30- and 55-watt units.
Yamitsu Algae Master UV Replacement Bulbs
The Yamitsu Algae Master UV Replacement Bulbs are available for the whole range of the Yamitsu Algae Master Pond UV clarifiers. The T8 Bulbs are available in 5 different wattages with the 110w model requiring 2x 55w Bulbs. Since the UVC clarifier is mostly in constant use, the effect can wear off it is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season.
Sizes Available:
Japanese Matting Sets
Japanese Matting is probably one of the best of all the filtration media which is available in the UK today. Japanese Matting is extremely inert and easy to service.
This Japanese Matting comes in pre-cut packs to fit in the Kockney Koi bay filters.
Available in 5 sizes:
Yamitsu UV Wall Brackets
Yamitsu UV Wall Brackets are made for holding Yamitsu Uv’s, with easy access to remove for maintenance. Can also be used for holding other pipework. Clip ID 95.5mm.
These are sold singly
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.
However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.
Yamitsu Algae Master Pond UV Clarifier Installation
If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.
Yamitsu Algae Master UV Maintenance
Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.
As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.
|
||||||||||||||
This is the Yamitsu Algae Master Pond UV Clarifier Replacement Electrics and not the actual unit !
Yamitsu UV Replacement Black Retaining Clips
The Yamitsu UV Replacement Black Retaining Clip are genuine Yamitsu spares and fit the whole range of Yamitsu Clarifiers. The Retaining Clips tighten around the rubber end caps to help prevent water getting inside the end caps.
These are sold individually
Yamitsu Algae Master Pond UV Replacement Bodys
The Yamitsu Algae Master Pond UV Replacement Bodys are genuine replacements. These are available in four different sizes for the whole range.
Kockney Koi Platinum Filters Replacement Foams
The Kockney Koi Replacement Foams are available for the whole range of filters. There are 4 different sets 8,000, 14000, 20000 and the 26000/30000.
Includes: 10″ x 16″
Includes: 25″ x 18″
Includes: 25″ x 18″
Includes 25″ x 18″
Reviews
There are no reviews yet