Description
Silicone Applicator Gun
Our Silicone Application guns are perfect for 310ml silicone or caulking tubes, comes complete with a nozzle clearing piece to stop the nozzle blocking.
Silicone Applicator Gun
£3.99 inc. VAT
Silicone Applicator Gun
Our Silicone Application guns are perfect for 310ml silicone or caulking tubes, comes complete with a nozzle clearing piece to stop the nozzle blocking.
Only logged in customers who have purchased this product may leave a review.
Q & A
There are no questions yet
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 40 × 15 × 15 cm |
Related Products
Griffon ABS Solvent Weld Glue
Griffon ABS Solvent Weld Glue
The Griffon ABS Solvent Weld Glue is For joining pipes, sockets and fittings with interference fit in pressure and drainage systems. With special pipe brush for quick and easy application. Suitable for diameters ≤ 160 mm. Max. 10 bar (PN 10). Maximal tolerances 0.3 mm diametrical clearance / 0.2 mm press fit. Suitable for e.g. pipe systems conforming to EN 1455 and ISO15493 (ABS).
Directions for use
- Cut pipes square, chamfer edges and deburr.
- Clean surfaces with Griffon Cleaner and Cleaner Cloth.
- Apply adhesive rapidly and evenly all around (4-6x) on both surfaces (pipe thickly, socket thinly).
- Assemble joint immediately.
- Remove excess adhesive.
- Do not load the joint mechanically for the first 10 minutes.
- Close packaging immediately after use.
PondPal Underwater Pond Sealer
PondPal Underwater Pond Sealer
PondPal is a strong underwater sealant that allows you to repair rips and holes in pond liners. It is non-toxic, is solvent and isocyanate-free so there is no need to drain your pond when making the repair.
Perfect for use with butyl pond liners this pond sealant will bond to a variety of surfaces.
- Pond and Aquarium Sealer
- Fish safe sealer that can be used underwater for instant repairs
- Solvent & Isocyanate Free
- Bonds all surfaces Ideal for Butyl Rubber, Vinyl, Glass, Plastic, Ceramic, Stone, Concrete and more.
- Most advanced underwater formula
- Stronger than Silicone
Only available in Black
Aqua Forte Super-Strong Fix & Seal
Aqua Forte Super-Strong Fix & Seal
Aqua Forte Super-Strong Fix & Seal – 290ml gun tube
Super-strong Fix & Seal is a high quality permanent elastic glue & sealer.
This product has the unique ability to seal different materials to each other & replaces/combines the qualities of all standard glues & sealers (i.e. silicone, acryl, butyl, etc.)
Use for sealing or connecting:
- Flanges
- TPRs
- GPRs
- Waterfall lips
- Skimmer faceplates
- Bottom drainsFix & Seal is 100% fish safe & UV resistant. End result can be painted.
Griffon Pipe Cleaner
Griffon Pipe Cleaner
Griffon Pipe Cleaner is a perfect product to clean and degrease your pipe and fittings ready for application. This product is also for cleaning up your tools and will also remove uncured adhesive residue.
This product is available in two different sizes 125ml and 500ml.
AquaForte Landscaping Foam
AquaForte Landscaping Foam
The AquaForte Landscaping Foam is a foam filler has a high resistance to UV light which helps to ensure that its colour remains stable over time, even when exposed to direct sunlight. This Polyurethane foam expands evenly and bonds quickly to porous or non-porous rock, stone.
- Won’t discolour like other foam! Blends into shadows
- Polyurethane sealant; ideal for ponds and waterfalls and aquariums
- Fish and plant safe
- Superior adhesive for landscaping projects. Expands and fills voids
- Fill knot holes in trees to seal out water
- Great way to glue rocks together
- Product has a dark grey colour after curing
- Available in 500ml
Gold Label Underwater Pond Sealer
Gold label Underwater Pond Sealer
Gold label Underwater Pond Sealer does exactly what the name says, Gold label Underwater Sealer is remarkable and it will seal everything and everything, stainless steel to stainless steel, it will stick steel to plastic, plastic to wood, wood to stone, stone to plastic and what’s more as the name suggests it can be used underwater.
Yes actually underwater, Gold label Underwater Sealer is a truly remarkable product , imagine being able to seal any leak without having to drain the pond and further more Gold label Underwater Sealer is completely safe for the fish or any other pond life.
No longer need you worry about sealing that Pond liner and installing a Bottom Drain use Gold label Underwater Sealer and it will never leak, in fact you would have to break the bottom drain to be able to remove it, repair instantly a cut in the liner below the water level, if you can reach it then you can seal it without any worries whatsoever.
Gold label Underwater Sealer Instructions:
For best results clean all surfaces to be free of grease, algae, etc.
Place Gold label Underwater Sealer directly onto the surface you wish to bond/seal.
For bonding where there is movement (expansion and contraction) of different materials leave a minimum 2mm thickness of bead between surfaces.
Gold label Underwater Sealer for Full cure needs 24 hours, initial tack 2-3 hours, can be painted over up to 4 hours.
Bonds all materials even under water.
- Butyl Rubber
- Vinyl
- Glass
- Ceramic
- Stone
- Concrete
- Wood
Gold label Underwater Pond Sealer is available in black or clear in colour and supplied in a tube ready for application using a skeleton gun.
Gold label Underwater Pond Sealer has a Shelf life 12 months if stored in dry conditions between 10-25°C
Gold label Underwater Pond Sealer is Available in 290ml tubes (Silicone gun required – not included)
PTFE Tape
PTFE Tape
PTFE Tape Is a must when installing pumps, UVs and any type of threaded pipework fitting for plumbing. PTFE is not suitable for gas. Available in single rolls 12mm x 12m or in packs of 10.
There are four main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste Pipe
- ABS Pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
Gold Label One Shot Sealant
Gold Label Underwater Pond and Aquarium One Shot Sealant:
Gold Label One Shot underwater sealant is ideal for pond and aquarium repairs due its remarkable ability to instantly repair and bond surfaces even while submerged in water. It is easy to use and there is no need to purchase or use a silicone gun. There is no need to remove fish from the water when using Gold Label sealer, it is solvent free and isocyanate free.
This high-quality, heavy-duty sealant is perfect for sticking together a wide variety of materials including, various forms of rubber, vinyl, plastic, ceramic, concrete, wood and much more. This makes Gold Label sealer the best product for pond repair work such as mending pond liner.
For the best results:
- Clean all surfaces so that they are free of grease, algae, etc.
- Distribute the underwater sealer directly onto the surface you wish to bond/seal.
- For bonding where there is movement (expansion and contraction) of different materials leave a minimum 5mm thickness of bead between surfaces.
- For bonding different liners, use 2 beads of sealant 150mm apart and leave to cure for 36 hours
- Gold label Underwater Sealer full cure will take approximately 24 hours, initial tack 2-3 hours and can be painted after 4 hours.
- Where livestock is present, protect from ingestion while curing. Full cure 24 hours. Initial tack 2-3 hours. Sealant will continuously harden for up to 7 days.
- Do not use below 10°c.
Available in Black 80ml foil tubes with trigger nozzle (no silicone gun required)
Reviews
There are no reviews yet