Home » Shop » Pond Building Supplies » Bottom Drains » 4″ SpinDrifter Aerated Bottom Drain Kit
4″ SpinDrifter Aerated Bottom Drain Kit
  • 4″ SpinDrifter Aerated Bottom Drain Kit

4″ SpinDrifter Aerated Bottom Drain Kit

(5 customer reviews)

£358.56 – £534.36 inc. VAT

4″ SpinDrifter Aerated Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.

3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

  • 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
  • 1 x 3mtr 4″ pressure pipe – PW7078
  • 1 x 3mtr 1″ pressure pipe – PW7601
  • 1 x 4″ 90 degree pressure swept bend – PW7645
  • 1 x 1″ 90 degree pressure bend – PW7088 (07139)

6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

  • 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
  • 2 x 3mtr 4″ pressure pipe – PW7078
  • 2 x 3mtr 1″ pressure pipe – PW7601
  • 1 x 4″ 90 degree pressure swept bend – PW7645
  • 1 x 1″ 90 degree pressure bend – PW7088 (07139)
  • 1 x 4″ Straight joiner – PW7081 (07190)
  • 1 x 1″ Straight joiner – PW7603 (07184)

9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

  • 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
  • 3 x 3mtr 4″ pressure pipe – PW7078
  • 3 x 3mtr 1″ pressure pipe – PW7601
  • 1 x 4″ 90 degree pressure swept bend – PW7645
  • 1 x 1″ 90 degree pressure bend – PW7088 (07139)
  • 2 x 4″ Straight joiner – PW7081 (07190)
  • 2 x 1″ Straight joiner – PW7603 (07184)

If it’s for a liner installation then a flange kit is required and can be added to your basket separately .

 

 

These drains are currently not available please check out are range of drains  Here 

Clear selection
SKU: N/A Category:

Description

4″ SpinDrifter Aerated Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.

3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

  • 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
  • 1 x 3mtr 4″ pressure pipe – PW7078
  • 1 x 3mtr 1″ pressure pipe – PW7601
  • 1 x 4″ 90 degree pressure swept bend – PW7645
  • 1 x 1″ 90 degree pressure bend – PW7088 (07139)

6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

  • 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
  • 2 x 3mtr 4″ pressure pipe – PW7078
  • 2 x 3mtr 1″ pressure pipe – PW7601
  • 1 x 4″ 90 degree pressure swept bend – PW7645
  • 1 x 1″ 90 degree pressure bend – PW7088 (07139)
  • 1 x 4″ Straight joiner – PW7081 (07190)
  • 1 x 1″ Straight joiner – PW7603 (07184)

9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

  • 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit  – AP4451
  • 3 x 3mtr 4″ pressure pipe – PW7078
  • 3 x 3mtr 1″ pressure pipe – PW7601
  • 1 x 4″ 90 degree pressure swept bend – PW7645
  • 1 x 1″ 90 degree pressure bend – PW7088 (07139)
  • 2 x 4″ Straight joiner – PW7081 (07190)
  • 2 x 1″ Straight joiner – PW7603 (07184)

If it’s for a liner installation then a flange kit is required and can be added to your basket separately .

 

5 reviews for 4″ SpinDrifter Aerated Bottom Drain Kit

  1. Paul Harris (verified owner) –

  2. Jamie (verified owner) –

  3. Chris (verified owner) –

  4. Ryan Bailey (verified owner) –

    Amazing quality product!

  5. richard (verified owner) –

    Excellent price and delivery

Only logged in customers who have purchased this product may leave a review.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Additional information

Weight N/A
Dimensions N/A
Length

3m Kit, 6m Kit, 9m Kit

You may also like…

Griffon Solvent Weld Glue
Griffon Solvent Weld Glue

Griffon Solvent Weld Glue

Griffon WDF-05 Wet & Dry Fast Curing Cement has a slightly blue colour to give an easily recognised glued state of joints which is useful in large pipework installations, as it is sometimes easy to forget to glue a joint!

Solvent cement for joining PVC and ABS (flexible) tubes, coupling sleeves and fittings in Koi Ponds and Swimming Pool Pipework up to diameter 160 mm.

Maximum pressure 16 bar for PVC, and 5 bar for ABS.

Can be used in wet conditions, but not below 5° C.

  • Suitable for Wet and Dry Conditions
  • Extremely fast drying
  • For PVC and ABS
  • Gap filling
  • For Flexible tubes (hoses)
  • For Pond and Swimming Pool Installations
  • Brush included
  • According to European standard EN 14814
  • 250ml

Griffon WDF-05 was developed in close collaboration with pipe manufacturers and pond builders and is ideal for use in humid conditions. WDF-05 is the perfect adhesive for bonding thick-walled PVC flexible hoses and rigid PVC pipes, joints and fittings.

WDF-05, in a distinctive blue color, is very fast and suitable for pressure pipes and drainage systems.

The thixotropic character makes it the suitable solvent cement to use for both tight and wide applications. WDF-05 can be used for pipe diameters up to 160 mm and a maximum pressure of 16 bar (PN 16).

 

 

https://youtu.be/6qoC62eNYWA

£12.50 inc. VAT Add to basket
Gold label underwater pond sealer
Gold Label Underwater Pond Sealer

Gold label Underwater Pond Sealer

Gold label Underwater Pond Sealer does exactly what the name says, Gold label Underwater Sealer is remarkable and it will seal everything and everything, stainless steel to stainless steel, it will stick steel to plastic, plastic to wood, wood to stone, stone to plastic and what’s more as the name suggests it can be used underwater.

Yes actually underwater, Gold label Underwater Sealer is a truly remarkable product , imagine being able to seal any leak without having to drain the pond and further more Gold label Underwater Sealer is completely safe for the fish or any other pond life.

No longer need you worry about sealing that Pond liner and installing a Bottom Drain use Gold label Underwater Sealer and it will never leak, in fact you would have to break the bottom drain to be able to remove it, repair instantly a cut in the liner below the water level, if you can reach it then you can seal it without any worries whatsoever.

Gold label Underwater Sealer Instructions:

For best results clean all surfaces to be free of grease, algae, etc.

Place Gold label Underwater Sealer directly onto the surface you wish to bond/seal.

For bonding where there is movement (expansion and contraction) of different materials leave a minimum 2mm thickness of bead between surfaces.

Gold label Underwater Sealer for Full cure needs 24 hours, initial tack 2-3 hours, can be painted over up to 4 hours.

Bonds all materials even under water.

  • Butyl Rubber
  • Vinyl
  • Glass
  • Ceramic
  • Stone
  • Concrete
  • Wood

Gold label Underwater Pond Sealer is available in black or clear in colour and supplied in a tube ready for application using a skeleton gun.

Gold label Underwater Pond Sealer has a Shelf life 12 months if stored in dry conditions between 10-25°C

Gold label Underwater Pond Sealer is Available in 290ml tubes (Silicone gun required – not included)

£19.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Spindrifter liner Flange Kit
Spindrifter Liner Flange Kits

Spindrifter Liner Flange Kits

The Spindrifter liner Flange Kit allows you to use the drain with a liner.

Comes complete with fixings.

4″ Flange

  • 350mm external diameter
  • 250mm internal  diameter
  • 5mm thick
  • 50mm flange width
  • 12 holes

3″ Flange

  • 295mm external diameter
  • 200mm internal  diameter
  • 5mm thick
  • 48mm flange width
  • 8 holes

2″ Flange

  • 238mm external diameter
  • 160mm internal  diameter
  • 5mm thick
  • 40mm flange width
  • 6 holes

Available for the 4″, 3″ and 2″ Spindrifter Drains

 

£18.99 – £25.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page

Related Products

Aquadrift 4″ Bottom Drain
Aquadrift 4″ Bottom Drain

Aquadrift 4″ Bottom Drain

The Aquadrift 4″ Bottom Drain is perfect for all gravity fed installations.

Precision machine cut to the highest standard, a bottom drain you can rely on.

1″ separate pressure pipe air connection allows air to enter the drain independently from the water pipe outlet.

The membrane and backing plate on the Aquadrift bottom drain fits into a recess in the specially manufactured rubber dome . The recess in the Aquadrift bottom drain prevents the membrane from becoming detached. The complete assembly is secured to the Aquadrift bottom drain by means of a threaded stem, which also provides the air inlet.

Suitable for 4″ or 110mm pipework. Can be used with standard waste pipe with suitable connectors.

Recommended maximum air pressure 120ltrs

Can be used with no air hose to the unit, simply use the appropriate connector after your air pump

not rated £213.99 inc. VAT Add to basket
Draco Retro Fit Bottom Drain
Draco Retro Fit Bottom Drain

Draco Retro Fit Bottom Drain

It is said that you can not beat a bottom drain system. If you have a pond that does not have a bottom drain but wish you had installed one, or do you have a bottom drain and want to install another here is the answer.

Allows you to retrofit a bottom drain into your pond and change the system from pump fed to a true gravity fed filter system if filter is lowed to height of pond.

Comes complete with everything that is required to install

3” internal smooth wall pipe (3m standard additional can be purchased)

14 inch long through wall pipe

Angled inlet bottom drain unit

10ft pipe = 2.5cm head drop @ 2200 UK gallons per hour / 10000 litres per hour

15ft pipe = 2.5cm head drop @ 1900 UK gallons per hour / 8600 litres per hour

 

*please note 3″ valve not included 

not rated £290.99 inc. VAT Add to basket
Aquadrift Liner Flange Kit
Aquadrift Liner Flange Kit

Aquadrift Liner Flange Kit

The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.

not rated £20.99 inc. VAT Add to basket
Economy Bottom Drains
Economy Bottom Drains

Economy Bottom Drains

All Koi ponds should be fitted with bottom drains, and we strongly recommend this.

These economy bottom drains are well made and are suited for use with 110mm or 50mm waste pipe.

We cannot express the importance of installing a bottom drain when planning and building your pond and these drains provide a cost effective way of doing this.

*NOTE: It cannot be used with pressure pipe without an adapter.

 

https://youtu.be/4hdSwxpXXo8

£18.99 – £21.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
110mm Economy Bottom Drain Kit
110mm Economy Bottom Drain Kit

110mm Economy Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.

3mtr 110mm Economy Bottom Drain Kit

  • 1x 110mm Economy Bottom Drain – PW634
  • 1x 3mtr 110mm Pipe – PW617
  • 1x 110mm Black Waste 90 degree bend – PW623

6mtr 110mm Economy Bottom Drain Kit

  • 1x 110mm Economy Bottom Drain – PW634
  • 1x 110mm Black Waste Straight connector PW622
  • 2x 3mtr 110mm Pipe – PW617
  • 1x 110mm Black Waste 90 degree bend – PW623

9mtr 110mm Economy Bottom Drain Kit

  • 1x 110mm Economy Bottom Drain – PW634
  • 2x 110mm Black Waste Straight connector PW622
  • 3x 3mtr 110mm Pipe – PW617
  • 1x 110mm Black Waste 90 degree bend – PW623
not rated £62.47 – £134.31 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Retro Fit Bottom drain
Retro Fit Bottom Drain

Retro Fit Bottom Drain

The New Retro Fit Bottom Drain bottom drain, Portable Bottom Dome / Suction Drain

Improves water circulation, helps remove suspended particles and debris from the bottom of your pond reducing maintenance.

It is said that you can not beat a bottom drain system. If you have a pond that does not have a bottom drain but wish you had installed one, or do you have a bottom drain and want to install another here is the answer.
A bottom dome that sits on the floor of your pond which requires no digging or intensive labour. Just simply place the self -weighted bottom dome in your pond and attach a pipe from either an internal pump such as an oase aquamax or promax (these pumps have two inlets) or an external pond pump,and enjoy all the benefits of a bottom drain with minimal expense.

 

 

£108.99 inc. VAT Add to basket
Pro line aerated Drain
Pro-Line 4″ Aerated Bottom Drain

Pro-Line 4″ Aerated Bottom Drain

The Pro-Line 4″ Bottom Drain is perfect for all gravity fed installations.

Precision machine cut to the highest standard, a bottom drain you can rely on.

1″ separate pressure pipe air connection allows air to enter the drain independently from the water pipe outlet.

Suitable for 4″ or 110mm pipework. Can be used with standard waste pipe with suitable connectors.

not rated £195.99 inc. VAT Add to basket
Spindrifter Aerated Bottom Drain Twin Inlets
Spindrifter Aerated Bottom Drain Twin Inlets

Spindrifter Aerated Bottom Drain Twin Inlets

The Spindrifter bottom drain is known worldwide for its quality and design. This unit completely replaces the “Standard Bottom Drain.”
The most noticeable feature is the extra connection in the sump of the drain. This allows the air supply hose to enter the sump independently of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach. The membrane and backing plate fit into a recess in the specially manufactured dome (provided). The recess in the dome prevents the membrane from becoming detached. The complete assembly is secured to the bottom drain by means of stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a nickel-plated connector.

 

not rated £298.99 inc. VAT Read more