Description
Amalgam Submersible Replacement Quartz UV 40 watt
Amalgam Submersible Replacement Quartz UV 40 watt
£39.99 inc. VAT
Amalgam Submersible Replacement Quartz UV 40 watt
Out of stock
Only logged in customers who have purchased this product may leave a review.
Q & A
There are no questions yet
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 50 × 15 × 15 cm |
Related Products
Yamitsu Quartz Sleeves
Yamitsu Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful at they might be, we do also sell the spare Yamitsu Quartz Sleeves in the most standard sizes.
The Yamitsu Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water. Yamitsu Quartz Sleeves are of open-ended construction and are made from pure fused quartz.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made from crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
Yamitsu Quartz Sleeve Benefits:
- Greater ultraviolet transmission
- Low coefficient of thermal expansion
- Increased hardness and resistance to scratching
- Higher resistance to solarisation or darkening from ultraviolet radiation
Yamitsu Quartz Sleeve Dimensions:
15w/25w
- Overall length 430mm
- External diameter 30mm
- Internal diameter 27mm
30w/55w
- Overall length 890mm
- External diameter 30mm
- Internal diameter 27mm
Quartz sleeves are available for the Yamitsu Algae Master Pond UV Clarifier 6, 8, 11, 15-, 25-, 30- and 55-watt units.
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.
Benefits
- These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
- The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
- A special tank connector is available for direct installation in i.e. filters.
Note:
- This product is only intended for professional use.
- It should be installed in a professional application or assembled with other appliances.
- Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
- Immersion UV-C
T5 Submersible 40-75W UVC Replacement Quartz Sleeve and not the complete unit
Bio-UV Replacement Bulbs
Bio-UV Replacement Bulbs
These are genuine Bio-UV Bulbs and are available for our range of Bio UVs.This is one of the most integral parts of your overall filtration system, yet we often forget to maintain it as time goes by. You should replace the UV lamp in your UV unit every year. Although the lamp may still burn, it no longer emits the right UV radiation.
Filtreau Drum Filter Replacement UV Lamps
Replacement lamp for Filtreau and AEM drum filters.
40w Amalgam – 4 Pin and 80w Amalgam – 4 Pin
Yamitsu Algae Master UV Replacement Bulbs
Yamitsu Algae Master UV Replacement Bulbs
The Yamitsu Algae Master UV Replacement Bulbs are available for the whole range of the Yamitsu Algae Master Pond UV clarifiers. The T8 Bulbs are available in 5 different wattages with the 110w model requiring 2x 55w Bulbs. Since the UVC clarifier is mostly in constant use, the effect can wear off it is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season.
Sizes Available:
- 11w Bulb Length 210mm
- 15w Bulb Length 435mm
- 25w Bulb Length 435mm
- 30w Bulb Length 892mm
- 55w Bulb Length 892mm
- 110w Bulb Length 2x 892mm
Pond UV bulbs
Pond UV bulbs
Replacement UV lamps for practically any UV system.
This is one of the most integral parts of your overall filtration system, yet we often forget to maintain it as time goes by.
You should replace the UV lamp in your UV unit every year.
Although the lamp may still burn, it no longer emits the right UV radiation.
Depending on your UV unit, you will need an energy efficient PLS lamp, which have two pins at one end, we stock the 9 watt PLS and the 11 watt PLS
Or you may need the latest generation T8 lamps which have two pins at each end, these units are used in the TMC and Yamitsu Algae Master range of units.
Take care when ordering your replacement UV lamp, ensure that you buy the right replacement lamp.
UV Replacement Lamps
Be sure to clean the quartz glass of the unit carefully before installing the new lamp to optimise the light transmission.
Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note “Damaged” and refuse delivery.
A claim will ONLY be accepted if signed for as DAMAGED.
If you have any questions regarding our ultraviolet lights, please do not hesitate to contact us.
T5 Submersible 40W UVC Replacement Bulb
T5 Submersible 40W UVC Replacement Bulb
Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.
Benefits
- These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
- The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
- A special tank connector is available for direct installation in i.e. filters.
Note:
- This product is only intended for professional use.
- It should be installed in a professional application or assembled with other appliances.
- Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
- 40W Immersion UV-C
T5 Submersible 40W UVC Replacement Bulb and not the complete unit
Connector for Amalgam Submersible UVC Mounting
32mm Connector for Amalgam Submersible UVC Mounting
This is a great simple way to install your Amalgam Submersible UVC simply drill a 48mm hole in the desired location, insert the male part of the connector from the outside with the provided rubber seal. then tread the nut on from the inside. Then slide the Quartz tube though the connector from the outside with the O-ring provided with the uvc. insert the bulb, plug in the bulb connector and tighten the locking nut.
Connector for Amalgam Submersible UVC requires a 48mm hole.
Reviews
There are no reviews yet