Description
Aquadrift Liner Flange Kit
The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
£20.99 inc. VAT
Aquadrift Liner Flange Kit
The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
Aquadrift Liner Flange Kit
The Aquadrift Liner Flange Kit fits the Aquadrift 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Weight | 1 kg |
---|---|
Dimensions | 35 × 35 × 5 cm |
Economy Bottom Drains With Ring Aerator
All Koi ponds should be fitted with bottom drains, and we strongly recommend this.
These Economy Bottom Drains With Ring Aerator are well made and are suited for use with 110mm or 50mm waste pipe. The dome is removable with a large integral surface mounted air ring diffuser around the outer edge
We cannot express the importance of installing a bottom drain when planning and building your pond and these drains provide a cost effective way of doing this.
Available in 50mm and 110mm .
The Bottom Drain comes complete with air tube
*NOTE: It cannot be used with pressure pipe.
4″ Aquadrift Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3 mtr Aquadrift Aerated Bottom Drain Kit Includes :
6 mtr Aquadrift Aerated Bottom Drain Kit Includes :
9 mtr Aquadrift Aerated Bottom Drain Kit Includes :
Draco Retro Fit Bottom Drain
It is said that you can not beat a bottom drain system. If you have a pond that does not have a bottom drain but wish you had installed one, or do you have a bottom drain and want to install another here is the answer.
Allows you to retrofit a bottom drain into your pond and change the system from pump fed to a true gravity fed filter system if filter is lowed to height of pond.
Comes complete with everything that is required to install
3” internal smooth wall pipe (3m standard additional can be purchased)
14 inch long through wall pipe
Angled inlet bottom drain unit
10ft pipe = 2.5cm head drop @ 2200 UK gallons per hour / 10000 litres per hour
15ft pipe = 2.5cm head drop @ 1900 UK gallons per hour / 8600 litres per hour
*please note 3″ valve not included
4″ SpinDrifter Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
If it’s for a liner installation then a flange kit is required and can be added to your basket separately .
https://youtu.be/-ZGL-HGBnXI
4 Inch Socket To 110mm Plain Male Converter
The 4 Inch Socket To 110mm Plain Male Converter is designed to fit inside a bottom drain to convert the standard 4″ opening to 110mm.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
3″ SpinDrifter Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3″ SpinDrifter Aerated Bottom Drain Kit:
You can build the kit to suit your project
Spindrifter Aerated Drain lid
The Spindrifter Aerated Drain lid replaces the standard dome on your 4″ bottom drain. The unit has a wide diameter rubber insert with thousands of tiny holes to allow the air flow to come out.
The air line supply can either be inserted inside the length of the bottom drain pipe – coming out at a convenient place near to where your Air pump will be situated, or it can, be simply run across the base of the pond to your Air pump.
stem fits 1.5″ pressure
Spindrifter Liner Flange Kits
The Spindrifter liner Flange Kit allows you to use the drain with a liner.
Comes complete with fixings.
4″ Flange
3″ Flange
2″ Flange
Available for the 4″, 3″ and 2″ Spindrifter Drains
Reviews
There are no reviews yet