Home » Shop » Pond UV Lights » Bio-UV 30 professional UVC unit
Bio-UV 30 professional UVC unit
  • Bio-UV 30 professional UVC unit

Bio-UV 30 professional UVC unit

£2,240.99 inc. VAT

Bio-UV 30 professional UVC unit

The Bio UV Professional is probably the worlds best UV system made from 316L Stainless Steel. With a 6″ Body and 2-3″ returns for today’s high flow system. The Bio UV Professional incorporates a single lamp for ponds up to 30,000 gallons, with a long life lamp of 9000 hours. All units are IPS4 rating. Kills 99.9% of algae spores, bacteria and viruses.

How the Bio-UV 30 professional UVC unit works

It has been long known that ultraviolet lamps at a wavelength of 254 nanometers, or 2537 Angstrom, have high bactericidal, virucidal and algicidal properties. Type C ultraviolet eradicates germs by aggressively disrupting the cell metabolisms leading to their destruction. These lamps should not be mistaken for ozone producing lamps, which operate at different wavelengths. Ultraviolet radiation is measured in micro watts/second/cm2.

The key elements for efficient disinfecting are based, on one hand on the exposure time (i.e the ratio between the size of the pond and the flow rate through the filter) , and on the other hand, on the energy emitted in micro watts/second/cm2 at the furthest point from the lamp. Performance is measured in milijoules (mj) by combining the energy emitted by the lamp and the exposure time. The Bio UV range UV-C lamps work at levels above the minimum required to destroy the principle micro-organisms, which may be found in Koi ponds. In addition thanks to the reflection produced by the stainless steel (316L) within the chamber, efficiency is increased by 20 to 30 %. Micro-organisms must, in theory be exposed for a minimum of 1 second. However, BIO-UV equipment specifications, depending on the flow rates, double the exposure time to 2 seconds, for optimal disinfecting. In order not to hinder the action of the UV-C it is important to have a high filtration quality so that large particles do not screen the radiation.

Warranties

The Bio UV Professional offers a five-year warranty on the stainless steel chamber and a full year one-year warranty on all other components (including UV lamp).  If installed according to manual.

Finally

The The Bio UV Professional system gives you the comfort of knowing that your water quality is superior to that of any other type of system, ease of installation, virtually no maintenance and optimum reliability.

Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note “Damaged” and refuse delivery.

A claim will ONLY be accepted if signed for as DAMAGED.

Type Pond Size Height Watt GPH Dia Kg
Bio UV 10 Up to 4000 gallons 42 cm 30 2599 15 cm 7.6
Bio UV 20 Up to 8000 gallons 69 cm 55 4500 15 cm 9
Bio UV 30 Up to 15000 gallons 94 cm 87 7000 15 cm 11
Bio UV 40 Up to 27000 gallons 120 cm 105 9000 15 cm 14

 

This is the Bio-UV 30 professional UVC unit

SKU: uv480 Category:

Description

Bio-UV 30 professional UVC unit

The Bio UV Professional is probably the worlds best UV system made from 316L Stainless Steel. With a 6″ Body and 2-3″ returns for today’s high flow system. The Bio UV Professional incorporates a single lamp for ponds up to 30,000 gallons, with a long life lamp of 9000 hours. All units are IPS4 rating. Kills 99.9% of algae spores, bacteria and viruses.

How the Bio-UV 30 professional UVC unit works

It has been long known that ultraviolet lamps at a wavelength of 254 nanometers, or 2537 Angstrom, have high bactericidal, virucidal and algicidal properties. Type C ultraviolet eradicates germs by aggressively disrupting the cell metabolisms leading to their destruction. These lamps should not be mistaken for ozone producing lamps, which operate at different wavelengths. Ultraviolet radiation is measured in micro watts/second/cm2.

The key elements for efficient disinfecting are based, on one hand on the exposure time (i.e the ratio between the size of the pond and the flow rate through the filter) , and on the other hand, on the energy emitted in micro watts/second/cm2 at the furthest point from the lamp. Performance is measured in milijoules (mj) by combining the energy emitted by the lamp and the exposure time. The Bio UV range UV-C lamps work at levels above the minimum required to destroy the principle micro-organisms, which may be found in Koi ponds. In addition thanks to the reflection produced by the stainless steel (316L) within the chamber, efficiency is increased by 20 to 30 %. Micro-organisms must, in theory be exposed for a minimum of 1 second. However, BIO-UV equipment specifications, depending on the flow rates, double the exposure time to 2 seconds, for optimal disinfecting. In order not to hinder the action of the UV-C it is important to have a high filtration quality so that large particles do not screen the radiation.

Warranties

The Bio UV Professional offers a five-year warranty on the stainless steel chamber and a full year one-year warranty on all other components (including UV lamp).  If installed according to manual.

Finally

The The Bio UV Professional system gives you the comfort of knowing that your water quality is superior to that of any other type of system, ease of installation, virtually no maintenance and optimum reliability.

Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note “Damaged” and refuse delivery.

A claim will ONLY be accepted if signed for as DAMAGED.

Type Pond Size Height Watt GPH Dia Kg
Bio UV 10 Up to 4000 gallons 42 cm 30 2599 15 cm 7.6
Bio UV 20 Up to 8000 gallons 69 cm 55 4500 15 cm 9
Bio UV 30 Up to 15000 gallons 94 cm 87 7000 15 cm 11
Bio UV 40 Up to 27000 gallons 120 cm 105 9000 15 cm 14

 

This is the Bio-UV 30 professional UVC unit

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Manual

 

 

 

Bio UV.pdf

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Additional information

Weight 12 kg
Dimensions 70 × 30 × 20 cm

Related Products

Yamitsu Algae Master Pond UV Clarifier 110W
Yamitsu Algae Master Pond UV Clarifier 110W

Yamitsu Algae Master Pond UV Clarifier 110W

Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.

However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.

Yamitsu Algae Master Pond UV Installation

If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.

Yamitsu Algae Master UV Maintenance

Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.

As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.

 

Model 11 watt 15 watt 25 watt 30 watt 55 watt 110 watt
Pond Size 1000 gals. 1500 gals. 2500 gals. 3000 gals. 4500 gals. 10000 gals.
not rated £272.99 inc. VAT Add to basket
Evolution Aqua Evo UV 15 watt
Evolution Aqua Evo UV 15 watt

Evolution Aqua Evo UV 15 watt (2021 Model)

Evolution Aqua’s pond UV clarifiers have been completely re-designed for 2021, to deliver even greater performance and improved serviceability. Our range of six evoUV pond clarifiers are made using the very latest technology and design techniques, ensuring there is even water flow through the unit, and optimum ultraviolet light penetration.

One new feature is the ease of the serviceability of the evo UV. Changing bulbs, quartz sleeves or replacing a failed ballast are quick and simple to do.

The evo UV is simple to install, with universal mounting plates allowing you to fix the unit horizontally or vertically, or at any angle you choose.

The evo UV range of clarifiers have been designed to clear green water which is caused by single celled green algae and prevent it from returning. They will work alongside many different filtration systems but when used alongside Evolution Aqua’s pond filtration systems, the evo UV will help to deliver crystal clear and healthy pond water.

Your evo UV professional quality UV can be connected to your pond pump and filter with flexible hose using the stepped hosetails provided, or you can install the unit using hard pipe.

Features:

  • Improves water clarity by eradicating green water
  • High output, energy efficient ballast
  • Fully serviceable for easy maintenance
  • Easy to install
  • Available in six models
  • 2 year guarantee

 

https://youtu.be/hOCjlnzqwac

 

not rated £119.95 inc. VAT Add to basket
Connector for Amalgam Submersible UVC
Connector for Amalgam Submersible UVC Mounting

32mm Connector for Amalgam Submersible UVC Mounting

This is a great simple way to install your  Amalgam Submersible UVC  simply drill a 48mm hole in the desired location, insert the male part of the connector from the outside with the provided rubber seal. then tread the nut on from the inside. Then slide the Quartz tube though the connector from the outside with the O-ring provided with the uvc. insert the bulb, plug in the bulb connector and tighten the locking nut.

Connector for Amalgam Submersible UVC requires a 48mm hole.

£10.99 inc. VAT Add to basket
Yamitsu Algae Master Pond UV Clarifier 25W
Yamitsu Algae Master Pond UV Clarifier 25W

Yamitsu Algae Master Pond UV Clarifier 25W

Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.

However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.

Yamitsu Algae Master Pond UV Clarifier 25w Installation

If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.

Yamitsu Algae Master UV Maintenance

Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.

As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.

 

Model 11 watt 15 watt 25 watt 30 watt 55 watt 110 watt
Pond Size 1000 gals. 1500 gals. 2500 gals. 3000 gals. 4500 gals. 10000 gals.

 

£93.99 inc. VAT Add to basket
Amalgam Submersible UV 80 watt
Amalgam Submersible UV 80 watt

The Amalgam Submersible UV 80

The Amalgam Submersible UV 80 watt are the most effective form of uvc to date !

The Air Aqua Amalgam provides radiation with a wavelength of 253.7nm which is generated by the special light source UV lamp, Ensuring a lethal effect on bacterial.

The  Amalgam UV radiation neutralizes bacteria, viruses and other primitive organisms, stopping them form multiplying. The unit has a built in high frequency electronic ballast which absorbs current fluctuations and protects the lamp inside the unit.

Specification:
  • Amalgam Submersible UV 80 watt
  • For Ponds up to 60 m3 – 13000 gallons
  • Energy-saving: Amalgam saves 50-70% compared to normal TL-lamps
  • Optimal operation up to 16,000 (amalgam) hours
  • Short length: ideal for integration for Sieves or Drum Filters
  • No resistance in the system (from extra pipework)
  • Length 78 cm

The Amalgam Submersible UV 80 watt lamp is not affected by temperature fluctuation in the water and generates a constant powerful output and is know as being the most powerful uv-c on the market !

not rated £299.99 inc. VAT Add to basket
Delta UV EA Series
Delta UV EA Series

Delta UV EA Series

A new series of professional Stainless Steel UVC-units for ponds, pools, whirpools etc. The Delta Ultraviolet’s Elektra® Pro Delta Bio-UV series of UV sanitizers have been in production since 1999. These 100% Stainless Steel housing systems have become the “Cadillac” of UV sanitizers for the Koi Pond industry and have gained a reputation second to none for quality, functionality, performance and reliability.

Five different model sizes are available for circulation systems with water flow rates from 800 GPH (3,600 LPH) to 3,450 GPH (15,600 LPH). All models are available in 120V and 240V 50/60 Hz electrical ratings for worldwide application.

Exclusive features, as mentioned above include a 316 stainless steel housing that allows for 360° rotation of the inlet and outlet unions for ease of installation. Another key exclusive feature not commonly found in similar units is the inclusion of unions at each end of the stainless steel housing to facilitate cleaning of the quartz tube, should it be necessary.

As you can clearly see from the image below these UV’s can be mounted either vertically or horizontally.

Like all Delta Ultraviolet systems, Delta’s propriety High Output (HO) low pressure lamp is capable of 30,000 µ/sec./cm2 output lamp end-of-life (EOL) when design flow rates are maintained. This is the same requirement for Class A drinking water. The long life lamp is rated at 9000 hours of continuous use (approximately 1 year).

 

The UV-5 and UV-10 models contain a 3″ (076mm) Stainless Steel chamber, whilst the UV-4H10, UV-20, and UV-40 models each have a 4″ (100mm) Stainless Steel chamber. All models have 63mm solvent connections.

Delta UV EA Series Technical data

Type Pond Size Max Pressure Flow Rate UV-C Dose Dia UV Lamps
Delta UV EA-3H-5 Up to 1500 gallons 3 Bar 2400 lph 30mJ/cm2 75 mm 1 x 35 watt

 

Type Pond Size Max Pressure Flow Rate UV-C Dose Dia UV Lamps
Delta UV EA-4H-15 Up to 4500 gallons 3 Bar 7600 lph 30mJ/cm2 100 mm 1 x 55 watt
Delta UV EA-4H-20 Up to 6000 gallons 3 Bar 9500 lph 30mJ/cm2 100 mm 1 x 90 watt
Delta UV EA-4H-40 Up to 7000 gallons 3 Bar 10700 lph 30mJ/cm2 100 mm 1 x 110 watt
not rated £468.99 – £864.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Oase Bitron C 36 Watt UVC
Oase Bitron C 36 Watt UVC

Oase Bitron C 36 Watt UVC

The UVC clarifier OASE Bitron C 36 W removes floating algae and reduces harmful bacteria for healthy and clear water. An automatic cleaning system ensures fully effective UVC radiation at all times. A control window provides additional functional reliability. Eye protection guaranteed by 100%, VDE-tested safety. With a power consumption of 36 watts, 4,500 l / h can flow past the UVC tube without a bypass. The flow can be individually adjusted and regulated. The OASE Bitron C 36 W UVC clarifier is available complete with a universal stepped hose nozzle from ¾ “(19 mm) to 2” (51 mm). The cable is 5 m long. A flow nozzle optimizes the flow to the cleaning rotor. The nominal voltage is 230 V / 50 Hz. Optimal for connection to BioSmart 18000/36000 and BioTec Screenmatic 12-18.

  • Clever bypass system combines high flow rates with duration of radiation
  • Permanent self-cleaning thanks to patented cleaning rotor
  • Highly effective against suspended algae, bacteria and germs
not rated £429.99 inc. VAT Add to basket
TMC Pro Pond UV 110
TMC Pro Pond UV 110

TMC Pro Pond UV 110

The TMC Pro Pond UV 110 watt is designed for large ponds, incorporating Ultrabead, Aquadyne, Bubblebead, Polygeyser and Nexus Eazy 300 filtration systems and can be used for pressurised systems up to 56psi.

The Pro Pond UV 110 watt has 2″ solvent weld inlet and outlet ports and may be connected to either flexible or rigid plumbing using the appropriate plumbing fittings (not supplied). To ensure unrestricted flow, it is recommended that the TMC Pro-Pond 110 watt is not plumbed in with anything less than 11/2″ pipework.

Suitable for ponds up to 16,000 imp gallons/72,000 litres (dependent on stocking density and the amount of sunlight the pond is subject to) with a max flow rate of 8000 imp gallons/36,000 litres per hour.

The TMC Pro Pond UV 110 watt has two individually chambered lamps for optimum efficiency and contact time.

The TMC Pro Pond UV 110 watt uses fused quartz glass sleeves which ensure that germicidal lamps are able to reach their optimum ‘burn temperature’ where the highest amount of UVc radiation is emitted. Also facilitates simple lamp replacement by keeping lamp separate from the pond water.

 

TMC Pro-Pond UV 110 watt features:

  • Supplied complete with 5m cable and 4 wall mounting pipe clips.
  • 930 mm long x 320 mm wide x 212mm high. Weight = 13.2kg.

Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note “Damaged” and refuse delivery.

£298.99 inc. VAT Add to basket