Certikin Liner Kit

Standard Black surface skimmer Front Grid (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.

This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.

The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.

All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.

All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!

Oase ProfiSkim Wall Height Extension

The ProfiSkim Wall Height Extension has been designed for use in conjunction with the Oase ProfiSkim Wall 100 pond skimmer. The Extension allows for a a more versatile installation such as under a terrace or wooden walkway with the Height Extension compensating for height differences.

• Compensates for height differences
• Designed for use with the Oase ProfiSkim Wall 100 Pond Skimmer

Oase ProfiSkim Wall 100

ProfiSkim Wall built-in skimmer sucks up dirt on pond surfaces of up to 30 m² before it can sink to the bottom. It has a DN 110 connection for optimal flow. The integrated dirt basket contains a pigging ladder. In the event that the small amphibians get in there, they can climb outside via a built-in staircase. In addition, the dirt basket can be easily removed for easy cleaning. There are useful accessories for the ProfiSkim Wall that you can purchase to individually install the built-in wall skimmer: wall extension, wide mouth extension, height extension and high-quality stainless steel panels.

Characteristics:

• Skims off debris from a pond surfaces of up to 30 m²
• For permanent installation in a wall
• The technology is protected through an integrated debris basket with wildlife evacuation system
• The debris basket is easy to take out for effortless cleaning from the front and from the top
• With useful accessories (optional): Wall extension, wide-mouth extension, height extension and high-quality stainless steel covers

For the best possible result, the wall-installation surface skimmer should be installed on the side of the pond that is away from the wind.

https://youtu.be/pEv1MaW0Dtk

Oase Floating Lake Skimmer

The Oase Floating Lake Skimmer 250 LM is a high-performance floating skimmer that keeps up to 250 m² of surface water clean. The floating skimmer is particularly well suited for bodies of water with significant water level fluctuation, and it can be flexibly implemented where pollutants accumulate. The system takes up pollutants via a skimmer flap that is 52 cm in width. Pollutants are gathered into an easy-to-remove collection basket for convenient disposal. The integrated, energy-efficient circulation pump ensures powerful skimming and generates ideal water flow thanks to focused water return. Leaves, pollen, and particles deposited on the water surface by wind are a risk to the biological equilibrium in a body of water. OASE skimmers powerfully and effectively pull these pollutant particles off of the surface and into the collection basket. Thus pollutants can be removed from the eco system of the body of water before they harm the eco system.

Oase Skimmer 250 LM features at a glance:

• Ideal water level adjustment through float design
• 52 cm wide skimmer flap for optimum skimmer performance
• Integrated pump
• Focused water return flow for efficient water circulation
• Extremely long service life due to canned motor technology without seals that are subject to wear.
• 27-litre stainless-steel pollutant collection basket
• High-quality workmanship with stainless steel components
• Fastening equipment included
• 2 year warranty