Certikin Liner Kit

Floating Surface Pond Skimmer XL

The floating Surface pond skimmer slides directly over a 160 -110 mm reducer and can than be connected to the pump or filter via a 110 mm tank connector through the pond wall.

The Floating Pond skimmer helps clean the pond surface of all dirt particles. As the skimmer floats it is suitable for most pond depths and self adjusts to changes in the water level. The base and floating parts are made of ABS. Can be used without basket when connected directly with a pre-filter.

• Height 280 mm
• Diameter 160mm
• To fit 110 mm Pipe

Standard Black surface skimmer Front Grid (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.

This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.

The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.

All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.

All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!

Wide Mouth Black surface skimmer (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A Wide Mouth Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The Wide Mouth Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Standard Wide Angle Skimmer Specifications:

• Wide Angle Skimmer for ponds upto 4000gallons
• Flow rate 1500 to 2000gph
• Wide Angle Skimmer throat width 350mm
• 1 1/2″ Male Union required
• Standard Wide Angle Skimmer Specification
• Overall Height = 350MM / Depth= 325MM / Width = 355MM.
• Throat Height= 130MM / Width= 295MM
• Front Face (approx) Height = 190MM / Width = 355MM
• Dimension. Forward edge of access cover to Pond Wall = 130mm

Oase AquaSkim Gravity

The AquaSkim offers powerful suction of up to 40 m² pond surface and adapts to water level changes of up to 120 mm – making it an effective addition to the entire filter system. It is worth the effort: significantly better water quality and visibility depth through direct dirt extraction from the surface. It has an easily removable debris basket that collects larger floating particles such as leaves.

Features:

• Supplement in the entire filter system
• Adapts to water level changes
• Easy to maintain with easy-to-access coarse debris basket

Characteristics:

• The result is clearly improved water quality and viewing depth through direct suction removal of pollutants on the surface
• Base with large surface receptacle shell for rocks as ballast
• Easy maintenance with easily accessible coarse debris basket
• Debris basket can also be taken out from a distance via grip hooks
• Ideal combination with AquaMax Eco Premium filter and watercourse pumps

• Powerful suction cleaning of pond surfaces up to 40 m2
• With high quality DN 160 / 110 adapter for easy integration in DN 110 line systems

Floating Surface Pond Skimmer XL

The floating Surface pond skimmer slides directly over a 160 -110 mm reducer and can than be connected to the pump or filter via a 110 mm tank connector through the pond wall.

The Floating Pond skimmer helps clean the pond surface of all dirt particles. As the skimmer floats it is suitable for most pond depths and self adjusts to changes in the water level. The base and floating parts are made of ABS. Can be used without basket when connected directly with a pre-filter.

• Height 280 mm
• Diameter 160mm
• To fit 110 mm Pipe

Standard Black surface skimmer Front Grid (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.

This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.

The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.

All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.

All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!