£110.99 inc. VAT
Certikin Wide Mouth Adaptor (Liner)
The Certikin wide mouth adaptor incorporates a front bezel eliminating the need for expensive finishing work and provides an effective “funnel” through to the skimmer.
The Certikin wide mouth adaptor is designed for installation in prefabricated, block and liner, or GRP Ponds. It is supplied complete with all the necessary gaskets and screws.
Certikin Wide Mouth Adaptor (Liner)
The Certikin wide mouth adaptor incorporates a front bezel eliminating the need for expensive finishing work and provides an effective “funnel” through to the skimmer.
The Certikin wide mouth adaptor is designed for installation in prefabricated, block and liner, or GRP Ponds. It is supplied complete with all the necessary gaskets and screws.
Only logged in customers who have purchased this product may leave a review.
| Weight | 4 kg |
|---|---|
| Dimensions | 45 × 30 × 30 cm |
Burtons In Wall Skimmer with 110mm outlet is ideal for an additional inlet in to your drum filter. Max pond surface area 40m2. Fixed in wall skimmer. Designed to sit over a standard concrete block. Min flow rate 8000l. Max flow rate 20,000l. Stainless steel front plate.
Wide Mouth Black surface skimmer (In-Wall concrete or liner)
Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.
Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.
A Wide Mouth Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.
Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.
The Wide Mouth Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.
If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.
Standard Wide Angle Skimmer Specifications:
Standard Black surface skimmer Front Grid (In-Wall concrete or liner)
Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.
Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.
A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.
Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.
The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.
If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.
Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.
This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.
The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.
All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.
All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!
Oase Floating Lake Skimmer
The Oase Floating Lake Skimmer 250 LM is a high-performance floating skimmer that keeps up to 250 m² of surface water clean. The floating skimmer is particularly well suited for bodies of water with significant water level fluctuation, and it can be flexibly implemented where pollutants accumulate. The system takes up pollutants via a skimmer flap that is 52 cm in width. Pollutants are gathered into an easy-to-remove collection basket for convenient disposal. The integrated, energy-efficient circulation pump ensures powerful skimming and generates ideal water flow thanks to focused water return. Leaves, pollen, and particles deposited on the water surface by wind are a risk to the biological equilibrium in a body of water. OASE skimmers powerfully and effectively pull these pollutant particles off of the surface and into the collection basket. Thus pollutants can be removed from the eco system of the body of water before they harm the eco system.
Oase Skimmer 250 LM features at a glance:
Oase ProfiSkim Wall Standard Stainless Steel Faceplate
The ProfiSkim Wall Standard Stainless Steel Faceplate is made from high quality stainless steel to ensure a sophisticated look and finish to your pond skimmer.
The ProfiSkim Wall Standard Stainless Steel Faceplate has been designed to be used in conjunction with the Oase ProfiSkim Wall 100 pond skimmer and the Oase ProfiSkim Wall Skimmer Extension.
Certikin Wide Mouth Adaptor
The Certikin wide mouth adaptor is available in white or black and incorporates a front bezel eliminating the need for expensive finishing work and provides an effective “funnel” through to the skimmer.
The Certikin wide mouth adaptor is designed for installation in prefabricated, block and liner, or GRP Ponds. It is supplied complete with all the necessary gaskets and screws.
Certikin Liner Kit
This Certikin liner kit allows you to use the certikin skimmer with a liner. Only available in white.
The Certikin Pond Skimmer System is a very important piece of equipment that normally gets overlooked at the time of construction. As a result the koi keeper normally wishes they had not forgotten. If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction. The purpose of the Surface Skimmer is to skim, or pull off, floating debris and even dust from the surface of your pond. We have put this kit together including a tempest as we believe you may aswell filter the water that you have removed through the skimmer before you return it and also adds to your biological.
Reviews
There are no reviews yet