Home » Shop » Pond UV Lights » Elecro Mini (110 Watt UVC) HR – Highly Reflective UV Unit (With lamp & Flow Indicator)
Elecro Mini (110 Watt UVC) HR – Highly Reflective UV Unit
  • Elecro Mini (110 Watt UVC) HR – Highly Reflective UV Unit

Elecro Mini (110 Watt UVC) HR – Highly Reflective UV Unit (With lamp & Flow Indicator)

£799.99 inc. VAT

Elecro Mini (110 Watt UVC) HR – Highly Reflective UV Unit (With lamp & Flow Indicator)

The Elecro Mini (110W) HR – High Reflective UVC has super reflective properties which optimises the UV-C radiation and dramatically increase the performance. The inside surface casing is extremely repellent and therefore self-cleaning. Intelligent electronics indicate when the lamps are not producing sufficient UV-C and need to be changed. Ensuring your unit is always performing optimally.

  • Highest UV reflective index on the market equating to supreme efficiency
  • E-PTFE reach chamber is extremely repellent, maintaining UV reflectivity
  • Up to 95% reflection amplifying the exposure of microorganisms to UV
  • No harmful gases or by-products produced
  • Neutralises bacteria, viruses, algae and Fungai that traditional chemicals cannot
  • Optional smart peristaltic dosing system for chlorine/hydrogen peroxide (Pro model only)
  • Powerful sterilisation and eliminates the smell of chlorine
  • Average lamp life expectancy: 2 years
  • Equipped with intelligent lamp life indicator
  • Sea and salt chlorinated water compatible
  • Available in three sizes: Mini (30m³), Single (55m³) and Double (110m³)
SKU: UV818 Category:

Description

Elecro Mini (110 Watt UVC) HR – Highly Reflective UV Unit (With lamp & Flow Indicator)

The Elecro Mini (110W) HR – High Reflective UVC has super reflective properties which optimises the UV-C radiation and dramatically increase the performance. The inside surface casing is extremely repellent and therefore self-cleaning. Intelligent electronics indicate when the lamps are not producing sufficient UV-C and need to be changed. Ensuring your unit is always performing optimally.

  • Highest UV reflective index on the market equating to supreme efficiency
  • E-PTFE reach chamber is extremely repellent, maintaining UV reflectivity
  • Up to 95% reflection amplifying the exposure of microorganisms to UV
  • No harmful gases or by-products produced
  • Neutralises bacteria, viruses, algae and Fungai that traditional chemicals cannot
  • Optional smart peristaltic dosing system for chlorine/hydrogen peroxide (Pro model only)
  • Powerful sterilisation and eliminates the smell of chlorine
  • Average lamp life expectancy: 2 years
  • Equipped with intelligent lamp life indicator
  • Sea and salt chlorinated water compatible
  • Available in three sizes: Mini (30m³), Single (55m³) and Double (110m³)

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Additional information

Weight 7 kg
Dimensions 60 × 50 × 50 cm

Related Products

Amalgam Submersible UV 40 watt
Amalgam Submersible UV 40 watt

The Amalgam Submersible UV 40

The Amalgam Submersible UV 40 watt are the most effective form of uvc to date !

The Air Aqua Amalgam provides radiation with a wavelength of 253.7nm which is generated by the special light source UV lamp, Ensuring a lethal effect on bacterial.

The  Amalgam UV radiation neutralizes bacteria, viruses and other primitive organisms, stopping them form multiplying. The unit has a built in high frequency electronic ballast which absorbs current fluctuations and protects the lamp inside the unit.

Specification:
  • For Ponds up to 35 m3 – 7500 gallons
  • Energy-saving: Amalgam saves 50-70% compared to normal TL-lamps
  • Optimal operation up to 16,000 (amalgam) hours
  • Short length: ideal for integration for Sieves or Drum Filters
  • No resistance in the system (extra pipework)
  • Length 50 cm

The Amalgam Submersible UV 40 watt lamp is not affected by temperature fluctuation in the water and generates a constant powerful output and is know as being the most powerful uv-c on the market !

£279.99 inc. VAT Add to basket
Evolution Aqua Evo UV 25 watt
Evolution Aqua Evo UV 25 watt

Evolution Aqua Evo UV 25 watt (2021 Model)

Evolution Aqua’s pond UV clarifiers have been completely re-designed for 2021, to deliver even greater performance and improved serviceability. Our range of six evoUV pond clarifiers are made using the very latest technology and design techniques, ensuring there is even water flow through the unit, and optimum ultraviolet light penetration.

One new feature is the ease of the serviceability of the evo UV. Changing bulbs, quartz sleeves or replacing a failed ballast are quick and simple to do.

The evo UV is simple to install, with universal mounting plates allowing you to fix the unit horizontally or vertically, or at any angle you choose.

The evo UV range of clarifiers have been designed to clear green water which is caused by single celled green algae and prevent it from returning. They will work alongside many different filtration systems but when used alongside Evolution Aqua’s pond filtration systems, the evo UV will help to deliver crystal clear and healthy pond water.

Your evo UV professional quality UV can be connected to your pond pump and filter with flexible hose using the stepped hosetails provided, or you can install the unit using hard pipe.

Features:

  • Improves water clarity by eradicating green water
  • High output, energy efficient ballast
  • Fully serviceable for easy maintenance
  • Easy to install
  • Available in six models
  • 2 year guarantee

 

https://youtu.be/hOCjlnzqwac

 

£124.95 inc. VAT Add to basket
Yamitsu Algae Master Pond UV Clarifier 11W
Yamitsu Algae Master Pond UV Clarifier 11W

Yamitsu Algae Master Pond UV Clarifier 11W

Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.

However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.

Yamitsu Algae Master Pond UV Clarifier 11w Installation

If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.

Yamitsu Algae Master UV Maintenance

Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.

As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.

 

Model 11 watt 15 watt 25 watt 30 watt 55 watt 110 watt
Pond Size 1000 gals. 1500 gals. 2500 gals. 3000 gals. 4500 gals. 10000 gals.

 

£66.99 inc. VAT Add to basket
T5 Submersible 40W UVC
T5 Submersible 40W UVC

T5 Submersible 40W UVC

Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.

Benefits

  • These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
  • The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
  • A special tank connector is available for direct installation in i.e. filters.
    Note:
  • This product is only intended for professional use.
  • It should be installed in a professional application or assembled with other appliances.
  • Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
  • 40W Immersion UV-C
  • Quartz sleeve length – 705mm
  • Ballast IP Rating – IP65
£209.99 inc. VAT Add to basket
Oase Bitron C 110 Watt UVC
Oase Bitron C 110 Watt UVC

Oase Bitron C 110 Watt UVC

The OASE Bitron C 110 W UVC clarifier removes floating algae and reduces harmful bacteria for healthy and clear water. An automatic cleaning system ensures fully effective UVC radiation at all times. A control window provides additional functional reliability. With a power consumption of 110 watts, 12,000 l / h can flow past the UVC tube without a bypass. The flow can be individually adjusted and regulated. The OASE Bitron C 110 W UVC clarifier is available complete with a universal stepped hose nozzle from ¾ “to 2”. The cable is 5 m long. A flow nozzle optimizes the flow to the cleaning rotor. The nominal voltage is 230 V / 50 Hz. Ideal for connection to ProfiClear, BioTec 30 and BioTec ScreenMatic 36. You receive a 2-year guarantee.

  • Clever bypass system combines high flow rates with duration of radiation
  • Permanent self-cleaning thanks to patented cleaning rotor
  • Highly effective against suspended algae, bacteria and germs
not rated £584.99 inc. VAT Add to basket
Connector for Amalgam Submersible UVC
Connector for Amalgam Submersible UVC Mounting

32mm Connector for Amalgam Submersible UVC Mounting

This is a great simple way to install your  Amalgam Submersible UVC  simply drill a 48mm hole in the desired location, insert the male part of the connector from the outside with the provided rubber seal. then tread the nut on from the inside. Then slide the Quartz tube though the connector from the outside with the O-ring provided with the uvc. insert the bulb, plug in the bulb connector and tighten the locking nut.

Connector for Amalgam Submersible UVC requires a 48mm hole.

£10.99 inc. VAT Add to basket
Yamitsu Algae Master Pond UV Clarifier 30W
Yamitsu Algae Master Pond UV Clarifier 30W

Yamitsu Algae Master Pond UV Clarifier 30W

Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.

However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.

Yamitsu Algae Master Pond UV Clarifier 30w Installation

If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.

Yamitsu Algae Master UV Maintenance

Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.

As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.

 

Model 11 watt 15 watt 25 watt 30 watt 55 watt 110 watt
Pond Size 1000 gals. 1500 gals. 2500 gals. 3000 gals. 4500 gals. 10000 gals.
£114.99 inc. VAT Add to basket
T5 Submersible 75W UVC
T5 Submersible 75W UVC

T5 Submersible 75W UVC

Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.

Benefits

  • These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
  • The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
  • A special tank connector is available for direct installation in i.e. filters.

Note:

  • This product is only intended for professional use.
  • It should be installed in a professional application or assembled with other appliances.
  • Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
  • 75W Immersion UV-C
not rated £238.99 inc. VAT Add to basket