MICROBE-LIFT Natural Algae Control

Microbe-Lift Phosphate Remover

Microbe-Lift Phosphate removeris the ultimate remedy for the removal of phosphates in fresh water.

Use Microbe-Lift Phosphate remover for starting new ponds which ensures low phosphate concentrations and mature ponds to ensure that the phosephate concentrations are kept at a minimum. To clear the pond’s water of phosphates sucessfully it is necessary to Use Phosphate remover regularly in both new and existing ponds.

Microbe-Lift Phosphate remover is a polymeric blend with outstanding qualities, including the ability to tie-up large quantities of phosphate without negatively influencing the pond water in any way.

Phosphate is caused by the decomposition of organic substances such as food surpluses, dead plant matter, and excretion. Although Phosphate is a vital part, it is only not detremental in low concentrations, however a phosphate increase could lead to water problems. To solve problems caused by Phosphate, it is recommended to keep the phosphate concentration in fresh water below 0.3ml/ltr.

Microbe-Lift Phosphate Remover Product Features:

• Safely removes Phosphate from Pond Water
• Will not harm fish or plants

Microbe-Lift Phosphate Remover Application:

Use 30ml of Microbe-Lift Phosphate Remover per 400 ltrs of pond water. Depending on the amount of organic/ fish waste , 30ml of phosphate remover can remove between 1 and 1.5mg per litre of phosphate. The dose can be repeated if the phosphate level is still too high, and sometime multiple treatement smay be necessary if ther eis a very high level of phophate present

1 litre on Phosphate remover will treat up to 12000 litres of pond water.

Microbe-Lift Clean N Clear

This Microbe-Lift Clean & Clear has been manufactured with a special blend of beneficial bacteria that keeps ponds clean & clear

Clean & Clear consist of photosynthetic bacteria which is grown in the bottle in which it is sold, it is due to this unique process that you reeive the bacteria in tip top condition.

Photosynthetic bacteria can be a very beneficial in balancing the ecology of a pond. This bacteria will compete with the algae for their nutritionand sunlight.

This Microbe-Lift product when used according to the recommended dosages will provide the following benefits:

• Keeps your Pond Clean & Clear
• Seeds and maintains biological filters.
• Reduces ammonia nitrogen levels
• Dissolves away organic sediment
• Safe for fish and Plants
• Reduces environmental stress
• Promotes rapid fish growth
• Biologically supports a healthy immune system
• Increases resistance to pathogens and parasites
• biodegrades uneaten food

Microbe-Lift Filter Gel

Microbe-Lift Filter Gel is a technology breakthrough becauseit’s the first product that puts the bacteria right where you want it and it stays there!. Microbe-Lift Filter Gel will quickly attach to and populate any filter media including foam, strapping, floss, bio balls, ceramic media and K1 etc.

Filter Gel will rapidly establish the necessary biological activity in your filter which in turn will stabilize your pond’s environment quickly.

Microbe-Lift Filter Gel will also help restore this activity to your filter when you clean or change the media in your filter.

Microbe-Lift Filter Gel Product Features:

• Easily applies to filters pads/medaia without running
• Contains the same spectrum of bacteria as Microbe-Lift/PL
• Contains naturally occurring biopolymers, helping organisms quickly attach to the media allowing 80% reduction in filter start-up time
• Helps to stabilize the pond’s environment quickly upon startup and to eliminate transient instability that can occur when filter media is cleaned or replaced
• Allows for more frequent cleaning of filters without subsequent instability if a pond has a high olids loading where more frequent cleaning is benficial
• Reduces the frequency of cleaning by accelerating the breakdown of organic solids that lead to high maintenance requirements.
• Helps to establish denitrification in the filter which can lower nitrate levels in the pond.

Application:

Inoculate (spread) the Microbe-Lift Filter Gel directly to the filter pad or media. The Filter Gel will absorb into the pad/media by letting it set for 1 to 2 hours before inserting the medaia back into the filter or skimmer. After the media has been inserted back i to the filter, turn off the recirculating pump for 1 to 2 hours, providing that the water can maintain adequate oxygenation without circulation for this amount of time. Repeat the application after each cleaning/replacement of filter pas/media.

For normal maintenance use Microbe-Lift Clean & Clear