£40.99 inc. VAT
Oase ProfiSkim Wall Height Extension
The ProfiSkim Wall Height Extension has been designed for use in conjunction with the Oase ProfiSkim Wall 100 pond skimmer. The Extension allows for a a more versatile installation such as under a terrace or wooden walkway with the Height Extension compensating for height differences.
Oase ProfiSkim Wall Height Extension
The ProfiSkim Wall Height Extension has been designed for use in conjunction with the Oase ProfiSkim Wall 100 pond skimmer. The Extension allows for a a more versatile installation such as under a terrace or wooden walkway with the Height Extension compensating for height differences.
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
| Weight | 5 kg |
|---|---|
| Dimensions | 40 × 40 × 40 cm |
Certikin Wide Mouth Adaptor (Liner)
The Certikin wide mouth adaptor incorporates a front bezel eliminating the need for expensive finishing work and provides an effective “funnel” through to the skimmer.
The Certikin wide mouth adaptor is designed for installation in prefabricated, block and liner, or GRP Ponds. It is supplied complete with all the necessary gaskets and screws.
Burtons In Wall Skimmer with 110mm outlet is ideal for an additional inlet in to your drum filter. Max pond surface area 40m2. Fixed in wall skimmer. Designed to sit over a standard concrete block. Min flow rate 8000l. Max flow rate 20,000l. Stainless steel front plate.
Oase ProfiSkim Wall Standard Stainless Steel Faceplate
The ProfiSkim Wall Standard Stainless Steel Faceplate is made from high quality stainless steel to ensure a sophisticated look and finish to your pond skimmer.
The ProfiSkim Wall Standard Stainless Steel Faceplate has been designed to be used in conjunction with the Oase ProfiSkim Wall 100 pond skimmer and the Oase ProfiSkim Wall Skimmer Extension.
Oase ProfiSkim Wall Wide Mouth Skimmer Extension
The Oase ProfiSkim Wall Wide Mouth Skimmer Extension piece provides a practical skimmer extension for the Oase ProfiSkim Wall 100 pond skimmer. This allows easier installation when the skimmer opening needs to be extended towards the pond edge. The Wide Mouth Extension features improved debris removal thanks to the larger skimmer opening.
The optional Oase ProfiSkim Wall Wide Mouth Stainless Steel Faceplate can be used in with conjunction with the Wide Mouth Extension for a modern, sophisticated look.
Floating Surface Pond Skimmer XL
The floating Surface pond skimmer slides directly over a 160 -110 mm reducer and can than be connected to the pump or filter via a 110 mm tank connector through the pond wall.
The Floating Pond skimmer helps clean the pond surface of all dirt particles. As the skimmer floats it is suitable for most pond depths and self adjusts to changes in the water level. The base and floating parts are made of ABS. Can be used without basket when connected directly with a pre-filter.
Standard Black surface skimmer (In-Wall concrete or liner)
Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.
Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.
A Standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.
Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.
The Standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.
If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.
Standard Skimmer Specifications:
https://youtu.be/omazo3fQVU8
Standard Black surface skimmer Front Grid (In-Wall concrete or liner)
Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.
Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.
A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.
Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.
The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.
If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.
Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.
This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.
The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.
All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.
All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!
Certikin Collar Weir Basket
Certikin Collar Weir Basket for easy conversion from flap weir to collar weir skimmer.
The Certikin Collar Weir Basket includes a basket, floating collar and guide.
Reviews
There are no reviews yet