£22.99 inc. VAT
Pro-Line 4″ Aerated Bottom Drain Flange Kit
The Pro-Line 4″ Aerated Bottom Drain Flange Kit fits the Pro-Line 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
Pro-Line 4″ Aerated Bottom Drain Flange Kit
The Pro-Line 4″ Aerated Bottom Drain Flange Kit fits the Pro-Line 4″ bottom drain and allows you to use it with a liner. This Liner flange kit comes with stainless steel screws and its pre drilled with countersunk holes.
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
| Weight | 1 kg |
|---|---|
| Dimensions | 35 × 35 × 5 cm |
Spindrifter Aerated Bottom Drain
The Spindrifter aerated bottom drain is known worldwide for its quality and design. This Spindrifter aerated bottom drain completely replaces the “Standard Bottom Drain.”
The most noticeable feature of the Spindrifter bottom drain is the extra 1 inch DIA Pressure pipe connection in the sump of the drain. This allows the air supply hose to enter the sump independent of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach.
The membrane and backing plate on the Spindrifter bottom drain fits into a recess in the specially manufactured dome (provided). The recess in the Spindrifter bottom drain prevents the membrane from becoming detached. The complete assembly is secured to the Spindrifter bottom drain by means of a stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a nickel plated connector.
Available Sizes:
Recommended Air Flow:
https://youtu.be/-ZGL-HGBnXI
Pro-Line 4″ Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3 mtr Pro-Line Aerated Bottom Drain Kit Includes :
6 mtr Pro-Line Aerated Bottom Drain Kit Includes :
9 mtr Pro-Line Aerated Bottom Drain Kit Includes :
Spindrifter 1 Inch Direct Air Feed Kit
The Spindrifter Direct Air Feed Kit allows you to hook up your air pump direct to the Diffuser; this means no Airline has to be threaded down the 1″ pressure pipe. This has a number of advantages but the main one is no water can find its way down the 1″ Pressure Pipe, which potentially will hold stagnant water and the dreaded blanketweed.
The Spindrifter bottom drain is known worldwide for its quality and design. The Spindrifter bottom drain completely replaces the “Standard Bottom Drain.”
The most noticeable feature of the Spindrifter bottom drain is the extra connection in the sump of the drain. This is where the machined Direct Air Feed connector glues in, supplying Air to the main diffuser stem. This allows the air supply hose to enter the sump independent of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach.
The second part of the Direct Air Feed glues on the end of the 1″ pressure pipe which typically will be located in the filter house, enabling you to connect to the Air Pump.
This Direct Air Kit also prevents any back pressure, causing premature failure on your Air pumps.
Aquadrift Bottom Drain Air Kit
The Aquadrift Bottom Drain Air Kit Is to connect the 1″ pressure pipe from the bottom drain to 19mm flexi hose that can be put to an air pump.
3″ SpinDrifter Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3″ SpinDrifter Aerated Bottom Drain Kit:
You can build the kit to suit your project
4 Inch Socket To 110mm Plain Male Converter
The 4 Inch Socket To 110mm Plain Male Converter is designed to fit inside a bottom drain to convert the standard 4″ opening to 110mm.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
4″ SpinDrifter Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.
3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
If it’s for a liner installation then a flange kit is required and can be added to your basket separately .
https://youtu.be/-ZGL-HGBnXI
Spindrifter Liner Flange Kits
The Spindrifter liner Flange Kit allows you to use the drain with a liner.
Comes complete with fixings.
4″ Flange
3″ Flange
2″ Flange
Available for the 4″, 3″ and 2″ Spindrifter Drains
Reviews
There are no reviews yet