Home » Shop » Pond Heating » Heat Exchangers » Submersible Stainless Steel Heat Exchangers
Submersible Stainless Steel Heat Exchangers 15kw-30kw
  • Submersible Stainless Steel Heat Exchangers 15kw-30kw
  • Submersible Stainless Steel Heat Exchangers 15kw
  • Submersible Stainless Steel Heat Exchangers 15kw sizes
  • Submersible Stainless Steel Heat Exchangers 30kw
  • Submersible Stainless Steel Heat Exchangers 30kw sizes

Submersible Stainless Steel Heat Exchangers

£118.99 – £181.99 inc. VAT

Submersible Stainless Steel Heat Exchangers

The heat exchangers are designed for full immersion in water. In addition to stainless steel heat exchangers. The heat exchangers are available in 2 models: for a heat transfer of approximately 15 kW and 30 kW respectively (with a temperature difference of approximately 50°C).

Stainless Steel Heat Coils: Freshwater Applications

  • designed for immersion: these coils are made to be fully submerged in water for excellent heat transfer without unnecessary resistance
  • easy installation: simply connect them to the home boiler, district heating, heat pump, or solar collectors
  • efficient in use: complete heat transfer to the water without any loss of pump capacity

 

Sizes and Details:
15kw  coil 12mm

size                           170mm Width  total length 470mm

Material                    aisi 316 gr. stainless steel

weight kg                  1.6kg

30kw coil 22mm

size                         370mm Width total length 590mm

Material                    aisi 316 gr. stainless steel

weight kg                  3.4kg

 

Clear selection
SKU: N/A Category:

Description

Submersible Stainless Steel Heat Exchangers

The heat exchangers are designed for full immersion in water. In addition to stainless steel heat exchangers. The heat exchangers are available in 2 models: for a heat transfer of approximately 15 kW and 30 kW respectively (with a temperature difference of approximately 50°C).

Stainless Steel Heat Coils: Freshwater Applications

  • designed for immersion: these coils are made to be fully submerged in water for excellent heat transfer without unnecessary resistance
  • easy installation: simply connect them to the home boiler, district heating, heat pump, or solar collectors
  • efficient in use: complete heat transfer to the water without any loss of pump capacity

 

Sizes and Details:
15kw  coil 12mm

size                           170mm Width  total length 470mm

Material                    aisi 316 gr. stainless steel

weight kg                  1.6kg

30kw coil 22mm

size                         370mm Width total length 590mm

Material                    aisi 316 gr. stainless steel

weight kg                  3.4kg

 

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Additional information

Weight N/A
Dimensions N/A
size

small 15kw, Large 30kw

Related Products

Submersible Stainless Steel Heat Exchangers 15kw-30kw
Submersible TITANIUM Heat Exchangers

The heat exchangers are designed for full immersion in water. In addition to stainless steel heat exchangers. The heat exchangers are available in 2 models: for a heat transfer of approximately 15 kW and 30 kW respectively (with a temperature difference of approximately 50°C).

Titanium Heat Exchangers: Saltwater Applications

exceptional corrosion resistance: titanium is highly suitable for saltwater environments due to its high resistance to corrosion
longer lifespan: thanks to the durability of titanium, these heat exchangers have a longer lifespan, especially in (aggressive) saltwater conditions
efficient heat transfer: just like our stainless steel models, these heat exchangers offer efficient heat transfer

Technical Data

15kw  12mm

Additional information Dimensions
Weight kg 0.9
Material Titanium

 

30kw  22mm

Additional information Dimensions
Weight kg 1.7
Material Titanium

 

not rated £214.20 – £365.40 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Elecro Poolsmart Plus Heating Controller
Elecro Poolsmart Plus Heating Controller

Elecro Poolsmart Plus Heating Controller

The Elecro Poolsmart Plus Heating Controller is the intelligent pool control system that allows you to control and maintain your pool to the perfect temperature as economically as possible. The controller features a digital touch screen display, allowing you to control the functions at a touch of a finger.

The priority heating function allows the controller to override the circulation pumps time clock, switching the circulation pump on and therefore allowing the heating appliance to heat your pool water to the required temperature. The controller will then switch the circulation pump off, ensuring your pool is always maintained at the perfect temperature.

Features & Benefits:

  • Smart touchscreen display
  • BMS (Building Management System) Integration Ready
  • Multi-lingual interface
  • Programmable 24-hour time clock (4 time zones)
  • Flow and temperature sensor ports
  • Accurate control to 0.5°C
  • Diagnostic display
Power Supply Single phase 100-240V
Available Models Heating only
Control Thermostat Digital: 0>45°C (0.5°C differential)
Temperature Sensor 3 metre long (thermistor 103AT-2, R25=10K B=3435K)
Flow Switch 3 metre long with gold tipped reed switch with titanium fulcrum pin
Ingress Protection Rating IP44
Frequency 50/60 Hz
Mounting Wall mounting
not rated £439.99 inc. VAT Add to basket
Elecro G2 Titanium Heat Exchangers
Elecro G2 Titanium Heat Exchangers
Elecro G2 Titanium Heat Exchangers

Elecro Multi-Tubular heat exchangers are comprised of a 38-piece Titanium tube bundle, giving a vast surface contact area for the two water circuits.

The primary circuit chamber – through which water from the heating source travels, is very narrow ensuring heat is absorbed and replaced with Hot water quickly.

These strategic design features enable the Elecro heat exchangers to perform very efficiently even when working with low value Primary temperatures, such as Solar heating systems.

The rigid aluminium jacket encapsulating a pocket of air, thermally insulates the entire unit ensuring that heat is transferred within the desired chamber and absorbed by the swimming pool water, rather than lost to the atmosphere.

Titanium Tube Bundles make the Elecro Heat Exchangers ideal for use on Salt Chlorinated pools.

The unique design and robust construction of the Elecro Generation 2 (G2) Heat Exchanger offers an unrivalled heat transfer surface area, making it one of the most efficient products on the market.

Featuring a densely packed tubular bundle in a thermally insulated primary chamber. The relatively small volume of the chamber and large surface area of the internal tubing provides superb heat transfer efficiency and minimal energy loss, making the G2 the perfect choice for all applications including gas or oil fired boiler circuits, solar panels, heat pumps or chillers.

The G2 is manufactured to the highest specification, using the strongest and most durable materials. The shell is constructed from BS 316L stainless steel (EN 1.4432) and enclosed by a rigid thermal casing for enhanced insulation of the primary water flow, ensuring maximum efficiency.

It has been designed to allow the installation engineer to select which way to plumb the primary and secondary water to achieve maximum thermal gain. This is achieved by routing the primary flow in an opposing direction to the secondary (pool) water.

The standard G2 heat exchanger is supplied complete with:

  • 2 x 1” male/male brass primary connections
  • 1 x 1” non-return valve
  • Titanium thermostat pocket
  • 1 x Blanking cap & coin gasket (for non-thermostat side)

Features:

  • Four models ranging from 30-kW to 122-kW
  • Robust, durable construction
  • 316 stainless steel shell with special polyamide fittings
  • 38 piece titanium internal tube bundle
  • For indoor or outdoor pools
  • Thermostat pocket
  • Solvent weld unions for connection to rigid pipe
  • 1.5” connections
  • Suitable for salt, chlorinated and solar heated pools
  • Available with fully equipped Analogue or Digital control (optional)
  • May be floor or wall mounted with the supplied bracket
  • BS 316L Stainless Steel shell (EN 1.4432) with special polyamide fittings
  • 3-year warranty
not rated £408.99 – £864.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Stainless Steel Heat Exchanger
Stainless Steel Heat Exchanger

Stainless Steel Heat Exchangers

A Stainless Steel Heat Exchanger is the most cost effective method of controlling the water temperature of Ponds.

Using a Stainless Steel Heat Exchanger provides a method of heating water by simply pumping the water, on it’s return to the pond in much the same you would connect a UV Steriliser

Water enters through the Inlet Pipe and then circulates past an inner Stainless Steel Coil. The coil contains hot water from the boiler. The heat from the ‘Hot Water’ in the inner coil never makes contact with the actual pond water but the heat generated from it is then transferred to the water flowing round it by radiation providing heat to your pond.

All Our Heat Exchangers are made from the finest quality 316 Stainless Steel and have a superb finish.

Heat Exchanger BTU 60K 100K 130K 170K 230K
Flow Rate (gph) 900 1440 1860 2460 3300
Pond Size (gallons) 5,000 7,500 10,000 15,000 20,000
£342.99 – £467.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Pro line Digi-Stat
Pro line Digi-Stat (With 3mtr Probe)

Pro line Digi-Stat (With 3mtr Probe)

The Pro line Digi-Stat is designed to give automatic temperature control for Koi ponds. Operating in the range of 0° to 30°C this highly accurate stat will hold the water temperature within ± 0.1°C. The unit is programmed with an automatic temperature gradient control which eliminates temperature shock for the fish when changing settings.

The unit will operate most boilers, motorized valves. A large clear display and easy setting mode make this a very user friendly thermostat.

The Pro line Digi-Stat is fully adjustable, waterproof (splash proof) and ideal for Gas or Oil installations.  Complete with 3 m probe and power connections.  LED display.  IP68 rated

In fact this Pro Digi-Stat uses the very same control system as the very popular Elecro heaters which I can assure you are the best heaters on the market !

 

£144.99 inc. VAT Add to basket