Certikin Collar Weir Basket

Standard Black surface skimmer Front Grid (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.

This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.

The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.

All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.

All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!

Oase Swim Skim 50

The successful SwimSkim concept has been consistently further developed: The big brother of the multi-talented SwimSkim 25 now keeps pond surfaces up to 50 m2 free of leaves, pollen, or similar particles.

Thanks to the innovative whirlpool function of the Oase SwimSkim 50, contaminants on the pond floor are stirred up and thus the Oase SwimSkim 50 is an ideal supplement to the FiltoMatic CWS. An aerator function that supplies the pond with vital oxygen, is also integrated.

Characteristics:

• The result is clearly improved water quality and viewing depth through direct removal of pollutants on the surface
• Integrated injector that enriches the pond with oxygen
• Extremely strong suction
• Easy cleaning with basket removal
• Automatic adaptation to any water level (from 40 cm water depth)
• Powerful suction cleaning of pond surfaces up to 50 m²
• Powerful suction cleaning of pond surfaces up to 50 m²
• Including whirlpool function for avoidance of floor sedimentation
• Special energy-saving Eco motor technology

Oase ProfiSkim Wall Standard Stainless Steel Faceplate

The ProfiSkim Wall Standard Stainless Steel Faceplate is made from high quality stainless steel to ensure a sophisticated look and finish to your pond skimmer.

The ProfiSkim Wall Standard Stainless Steel Faceplate has been designed to be used in conjunction with the Oase ProfiSkim Wall 100 pond skimmer and the Oase ProfiSkim Wall Skimmer Extension.

• Faceplate Only
• High quality stainless steel
• Designed to fit the standard ProfiSkim Wall 100 Pond Skimmer
• Can also be used to fit the Oase ProfiSkim Wall Skimmer Extension

Oase ProfiSkim Wall Height Extension

The ProfiSkim Wall Height Extension has been designed for use in conjunction with the Oase ProfiSkim Wall 100 pond skimmer. The Extension allows for a a more versatile installation such as under a terrace or wooden walkway with the Height Extension compensating for height differences.

• Compensates for height differences
• Designed for use with the Oase ProfiSkim Wall 100 Pond Skimmer

Standard Black surface skimmer Front Grid (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Have you ever had your favourite Koi badly damaged or even die as a result from its injuries due to it getting stuck in your skimmer, and then having to place a bit of mesh or similar in front only to find the skimmer is not as efficient.

This virtually eliminates water tension on any bar on or near the water level allowing free passage of all surface debris. Anything vertical or horizontal will always prevent total skimming.

The guard itself is manufactured from plastic and completely at home in both fresh and salt water and will safeguard your fish for many years to come.

All the edges of the guard are polished and honed to an ultra smooth finish It is so simple to fit and takes just a couple of minutes.

All You need to do is remove two of the existing stainless steel screws, offer the guard to the opening and replace the two screws. Its that easy!

Oase Swim Skim 50

The successful SwimSkim concept has been consistently further developed: The big brother of the multi-talented SwimSkim 25 now keeps pond surfaces up to 50 m2 free of leaves, pollen, or similar particles.

Thanks to the innovative whirlpool function of the Oase SwimSkim 50, contaminants on the pond floor are stirred up and thus the Oase SwimSkim 50 is an ideal supplement to the FiltoMatic CWS. An aerator function that supplies the pond with vital oxygen, is also integrated.

Characteristics:

• The result is clearly improved water quality and viewing depth through direct removal of pollutants on the surface
• Integrated injector that enriches the pond with oxygen
• Extremely strong suction
• Easy cleaning with basket removal
• Automatic adaptation to any water level (from 40 cm water depth)
• Powerful suction cleaning of pond surfaces up to 50 m²
• Powerful suction cleaning of pond surfaces up to 50 m²
• Including whirlpool function for avoidance of floor sedimentation
• Special energy-saving Eco motor technology